2010-09-14 11:46 keltezéssel, Laurent Gauch írta:
Hi,
the new Marvell PXA270M processor has a new TAPID: 0x89265013.
Attached you will find a patch for target/pxa270.cfg that will handle
this.
I have also attached a board/colibri.cfg file to support the Colibri
PXA270 module by Toradex.
Hope you can use it!
Best regards,
Áron Takács
Good, but I do not like board/colibri.cfg filename -> a bit too
generic as it is specific to a carrier board supporting the madule ...
Instead, it should be called board/toradex-colibri-carrier-pxa270 and
/ or board/toradex-colibri-module-pxa270 . Also, does the
srst_push_pull will be OK for all the colibri carrier boards and
module boards.
I agree that it is too generic, but the file is not specific for any of
the carrier boards of Toradex. I have tried it with the Developement
Board and without it (connecting directly to the JTAG connector of the
Colibri module) also. Both are working.
It is only specific to the type of the processor. Since there are
Colibri modules with different processors I suggest the name to be
board/toradex-colibri-pxa270.
my 2c !
Regards,
Laurent
http://www.amontec.com
JTAGkey-2 : Amontec USB JTAG cable generic solution.
_______________________________________________
Openocd-development mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/openocd-development
_______________________________________________
Openocd-development mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/openocd-development
