Peter Stuge wrote, On 09/16/2010 12:46 PM:
>/ Gene Smith wrote:
/>>/ This seems to be the only commercial eval board for this core (TMS570
/>>/ is actually dual core):
/>>/
/>>/ http://processors.wiki.ti.com/index.php/TMS570_MDK_Kit
/>>/
/>>/ The board is made by Keil (or has their name on it) for TI and
/>>/ another article shows using the jlink.
/>/
/>/ http://www.keil.com/MCBTMS570/
/>/ http://www.keil.com/support/man/docs/mcbtms570/mcbtms570_to_jtag.htm
/>/
/>/ They recommend JLink. I'm sure any JTAG is fine as long as you don't
/>/ require their µVision IDE/debugger to support it.
/>/
/>/
/>>/ They provide a direct usb debug interface that they mainly
/>>/ emphasize.
/>/
/>/ To what? Where?
/
The "CPU board" schematic shows this USB as FTDI going to a FT2232HL
part. So is like a built-in Olimex-ARM-USB-tiny? Also has a direct
20-pin ARM jtag interface.
http://www.keil.com/mcbtms570/picture.asp
(schematic links on left)
>/
/>/
/>>/ Any ideas on what kind of problems might be run into if using this
/>>/ with openocd via jtag?
/>/
/>/ If OpenOCD knows that ARM core then I think it should work, but
/>/ better test to know for sure. :\
/
First have to get one...
Thanks for responding.
Built-in XDS100v2 !!!!
Regards,
Laurent
JTAGkey-2 USB JTAG Cable 30Mhz from
The only JTAG Dongle with 5.5V to 1.3V capability at 30Mhz !
http://www.amontec.com
_______________________________________________
Openocd-development mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/openocd-development
