Hi, Am 17.03.2011 21:50, schrieb Sebastian Huber: > I just started with the OpenOCD and an Olimex USB-JTAG adaptor. Thanks > to the great documentation it was quite easy to set up. I have this GDB > script to load my application: > > set remote hardware-breakpoint-limit 2 > set remote hardware-watchpoint-limit 2 > target remote localhost:3333 > monitor arm7_9 fast_memory_access enable > monitor arm7_9 dcc_downloads enable > monitor reset halt > monitor arm core_state arm > load > > Now I have an upload rate of: > > Transfer rate: 39 KB/sec, 11510 bytes/write.
Depends.. I usually get only 4-5 KB/sec on our LPC1768 boards. > Is this a good or bad? When I set the JTAG clock to 6MHz, the load does > not work. It seems that only 500kHz is possible? If the CPU clock is around 4MHz on RESET, this is expected. You can look it up in the manual or your MCU. -- J. Fischer _______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
