On 19/03/11 02:54, Jörg Fischer wrote: > Hi, > Am 17.03.2011 21:50, schrieb Sebastian Huber: [...] >> Is this a good or bad? When I set the JTAG clock to 6MHz, the load does >> not work. It seems that only 500kHz is possible? >> > If the CPU clock is around 4MHz on RESET, this is expected. You can look > it up in the manual or your MCU. >
The CPU runs with 72MHz. There is a boot loader in the flash that sets up the PLL and SDRAM. _______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
