Oyvind,
Agreed about the speed and that is why I did not write a flash test.
If your RAM is working on your target your better to write a flash
test that resides in your target RAM.  However it is tough to test
your RAM if your not sure it works.  I had a board that had an issue
with the RAM and that is why I wrote these tests so I could figure out
what was wrong.
Regards,
Shane

On Fri, Jun 3, 2011 at 1:10 AM, Øyvind Harboe <oyvind.har...@zylin.com> wrote:
> My main concern about such a test would be that
> it doesn't run very quickly on the target. A great
> tool to have before moving on to running code on
> the target though!
>
>
>
>
> --
> Øyvind Harboe
>
> Can Zylin Consulting help on your project?
>
> US toll free 1-866-980-3434 / International +47 51 87 40 27
>
> http://www.zylin.com/zy1000.html
> ARM7 ARM9 ARM11 XScale Cortex
> JTAG debugger and flash programmer
>
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development

Reply via email to