On Tue, Jul 12, 2011 at 8:11 PM, Spencer Oliver <[email protected]> wrote:
> Could not apply your patch so had to do it manually.
>
> I have pushed changes to my testing repo:
> http://repo.or.cz/w/openocd/ntfreak.git
>
> No objections i will commit
This is good, tested under Ubuntu 10.10 64bit
(with the latency patch from Steve).
mcuee@ubuntu64:~$ openocd-d2xx -f board/ek-lm3s1968.cfg
Open On-Chip Debugger 0.5.0-dev-gb238735-dirty (2011-07-12-21:11)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.berlios.de/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'jtag'
500 kHz
Warn : unable to get latency timer: 4
Info : device: 4 "2232C"
Info : deviceID: 67353817
Info : SerialNumber: 070200A1A
Info : Description: Stellaris Evaluation Board A
Info : clock speed 500 kHz
Info : JTAG tap: lm3s1968.cpu tap/device found: 0x3ba00477 (mfg:
0x23b, part: 0xba00, ver: 0x3)
Info : lm3s1968.cpu: hardware has 6 breakpoints, 4 watchpoints
There is no warnings for ft2232.c, but there are some warnings for
/usb_blaster.c.
../git/ntfreak/configure --enable-maintainer-mode --disable-werror
--enable-jlink --enable-ft2232_ftd2xx --enable-usb_blaster_ftd2xx
--enable-parport --enable-dummy
--with-ftd2xx-linux-tardir=/home/mcuee/Desktop/build/openocd/d2xx/libftd2xx1.0.4
libtool: compile: gcc -std=gnu99 -DHAVE_CONFIG_H -I.
-I../../../../git/ntfreak/src/jtag/drivers -I../../..
-I../../../../git/ntfreak/src -I../../../src
-DPKGDATADIR=\"/usr/local/share/openocd\"
-DPKGLIBDIR=\"/usr/local/lib/openocd\"
-I../../../../git/ntfreak/jimtcl -I../../../jimtcl -g -O2
-I/home/mcuee/Desktop/build/openocd/d2xx/libftd2xx1.0.4 -Wall
-Wstrict-prototypes -Wformat-security -Wshadow -Wextra
-Wno-unused-parameter -Wbad-function-cast -Wcast-align
-Wredundant-decls -MT usb_blaster.lo -MD -MP -MF .deps/usb_blaster.Tpo
-c ../../../../git/ntfreak/src/jtag/drivers/usb_blaster.c -o
usb_blaster.o
../../../../git/ntfreak/src/jtag/drivers/usb_blaster.c: In function
'usb_blaster_buf_write':
../../../../git/ntfreak/src/jtag/drivers/usb_blaster.c:138: warning:
format '%lu' expects type 'long unsigned int', but argument 6 has type
'FT_STATUS'
../../../../git/ntfreak/src/jtag/drivers/usb_blaster.c: In function
'usb_blaster_buf_read':
../../../../git/ntfreak/src/jtag/drivers/usb_blaster.c:171: warning:
format '%lu' expects type 'long unsigned int', but argument 6 has type
'FT_STATUS'
../../../../git/ntfreak/src/jtag/drivers/usb_blaster.c: In function
'usb_blaster_init':
../../../../git/ntfreak/src/jtag/drivers/usb_blaster.c:387: warning:
format '%lu' expects type 'long unsigned int', but argument 6 has type
'FT_STATUS'
../../../../git/ntfreak/src/jtag/drivers/usb_blaster.c:405: warning:
format '%lu' expects type 'long unsigned int', but argument 6 has type
'DWORD'
../../../../git/ntfreak/src/jtag/drivers/usb_blaster.c:424: warning:
format '%lu' expects type 'long unsigned int', but argument 6 has type
'FT_STATUS'
../../../../git/ntfreak/src/jtag/drivers/usb_blaster.c:431: warning:
format '%lu' expects type 'long unsigned int', but argument 6 has type
'FT_STATUS'
../../../../git/ntfreak/src/jtag/drivers/usb_blaster.c:439: warning:
format '%lu' expects type 'long unsigned int', but argument 6 has type
'FT_STATUS'
mv -f .deps/usb_blaster.Tpo .deps/usb_blaster.Plo
--
Xiaofan
_______________________________________________
Openocd-development mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/openocd-development
