On Wed, Jul 13, 2011 at 6:26 PM, Spencer Oliver <[email protected]> wrote:
> On 12 July 2011 20:41, Spencer Oliver <[email protected]> wrote:
>> On 12/07/2011 16:03, Spencer Oliver wrote:
>>>
>>> I have pushed a fix for this issue - it checks the ftd2xx version etc.
>>> http://repo.or.cz/w/openocd/ntfreak.git
>>>
>>
>> If i do not here any objections i am going to push this to master.
>> It should be included in the 0.5 release
>>
>
> committed
>
Yes this is good.
Under Linux, ftd2xx 1.04 (based on libusb-1.0.8) does not seem to offer
any advantage than libftdi (tested with 0.19)
mcuee@Ubuntu:~/Desktop/build/openocd/lm3s1968$ openocd-d2xx -f
board/ek-lm3s1968.cfg
Open On-Chip Debugger 0.5.0-dev-00954-g0ea76bc (2011-07-13-20:28)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.berlios.de/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'jtag'
500 kHz
Error: unable to get latency timer: 0
Error: ftd2xx 1.04 detected - this has known issues with
FT_GetLatencyTimer, upgrade to a newer version
Info : device: 4 "2232C"
Info : deviceID: 67353817
Info : SerialNumber: 070200A1A
Info : Description: Stellaris Evaluation Board A
Info : clock speed 500 kHz
Info : JTAG tap: lm3s1968.cpu tap/device found: 0x3ba00477 (mfg:
0x23b, part: 0xba00, ver: 0x3)
Info : lm3s1968.cpu: hardware has 6 breakpoints, 4 watchpoints
Info : accepting 'telnet' connection from 4444
500 kHz
cortex_m3 reset_config sysresetreq
Info : JTAG tap: lm3s1968.cpu tap/device found: 0x3ba00477 (mfg:
0x23b, part: 0xba00, ver: 0x3)
target state: halted
target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x0001e340 msp: 0x20000200
flash 'stellaris' found at 0x00000000
auto erase enabled
wrote 262144 bytes from file ./demo.bin in 50.572987s (5.062 KiB/s)
500 kHz
cortex_m3 reset_config sysresetreq
Info : JTAG tap: lm3s1968.cpu tap/device found: 0x3ba00477 (mfg:
0x23b, part: 0xba00, ver: 0x3)
target state: halted
target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x0001e340 msp: 0x20000200
1200 kHz
flash 'stellaris' found at 0x00000000
auto erase enabled
wrote 262144 bytes from file ./demo.bin in 42.674957s (5.999 KiB/s)
^C
mcuee@Ubuntu:~/Desktop/build/openocd/lm3s1968$ openocd -f board/ek-lm3s1968.cfg
Open On-Chip Debugger 0.5.0-dev-00954-g0ea76bc (2011-07-13-20:21)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.berlios.de/doc/doxygen/bugs.html
Info : only one transport option; autoselect 'jtag'
500 kHz
Info : clock speed 500 kHz
Info : JTAG tap: lm3s1968.cpu tap/device found: 0x3ba00477 (mfg:
0x23b, part: 0xba00, ver: 0x3)
Info : lm3s1968.cpu: hardware has 6 breakpoints, 4 watchpoints
Info : accepting 'telnet' connection from 4444
500 kHz
cortex_m3 reset_config sysresetreq
Info : JTAG tap: lm3s1968.cpu tap/device found: 0x3ba00477 (mfg:
0x23b, part: 0xba00, ver: 0x3)
target state: halted
target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x0001e340 msp: 0x20000200
1200 kHz
flash 'stellaris' found at 0x00000000
auto erase enabled
wrote 262144 bytes from file ./demo.bin in 42.677986s (5.998 KiB/s)
^C
--
Xiaofan
_______________________________________________
Openocd-development mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/openocd-development
