Hi Andreas
I have access to a standalone Rlink, an Olimex STM32-P103 board and a
Raisonance REva STM32 connectivity board which has an onboard Rlink.
I've applied your patches and built OpenOCD on Linux with success. A
quick test revealed no problems but the test program I've used is too
small to see any speed differences when flashing. I can do more tests,
some hints for what to look for would be welcome.
Last time I've used OpenOCD with RLink stepping was awfully slow, about
3 seconds or more per step. This was some weeks ago and on Windows /
Mingw. On Linux, stepping is considerably faster both with and without
your patches, so I have to try the current version again on Windows.
Peter
_______________________________________________
Openocd-development mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/openocd-development
