On Sun, Sep 25, 2011 at 4:03 PM, Akos Vandra wrote: > I'm trying to follow your instructions here > http://stm32primer2swd.sf.net/ but I cannot find the interface script > for kt-link-swd. > I tried cloning the openocd git repo from here: > git://openocd.git.sourceforge.net/gitroot/openocd/openocd
The openocd-libswd trunk repository is git://repo.or.cz/openocd/libswd.git the http interface is at http://repo.or.cz/w/openocd/libswd.git Please tell me what is your build environment, I use FreeBSD, there were some issues with Linux build, but I fixed some of them (mainly on LibSWD, still there may be some in openocd), please let me know what does not work. I will setup virtual machine with your build environment and try to help you. I think Linux Ubuntu is the most common Linux distro nowadays..? I have been extremely overworked recently, please call me on chart for critical issues, I should have more time on mid October (~2..3 weeks) but I will support you as much as I can meanwhile :-) > My hardware is not a kt-link, but it *should* work, because the SWD > pinout is the same. The pin definitions are now taken out to the TCL / configuration file, so they should be not hardcoded (except standard FT2232 pins but we shout bring them out anyway) and easy to match any other interface with no need to rewrite the sources :-) Best regards! :-) Tomek -- CeDeROM, SQ7MHZ, http://www.tomek.cedro.info _______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
