On Thu, 2006-12-07 at 22:03 +0800, Steve Underwood wrote: > The first set of tests you did all failed in the same way. There seems > to be a bug in the Mediatrix box. It sent the following: > > Rx 73: data type T38_DATA_V17_14400/T38_FIELD_NON_ECM_DATA + 36 byte(s) > Rx 74: data type T38_DATA_V17_14400/T38_FIELD_NON_ECM_DATA + 36 byte(s) > Rx 75: data type T38_DATA_V17_14400/T38_FIELD_NON_ECM_DATA + 36 byte(s) > Rx 76: data type T38_DATA_V17_14400/T38_FIELD_HDLC_SIG_END + 0 byte(s) > > It ended a burst of non-ECM data with an HDLC end of signal message. > That's wrong, and and my T.38 software didn't like it. I have changed > spandsp so it should tolerate this rubbish. There are probably more > issues affects the other series of tests you did. However, if you still > have the mediatrix box can you try the snapshot of spandsp I just created: > > http://www.soft-switch.org/downloads/snapshots/spandsp/spandsp-20061207.tar.gz > > If you still have the equipment, can you try your first series of tests > again with this software, please? > > Regards, > Steve
Thank you Steve. Updated spandsp, recompiled openpbx and did several tests and put all results/debug to ftp server. Please check it out. ftp://70.147.242.42/pub/ Here is the brief summary: rxfax <-> HT488 - mostly works txfax <-> HT488 - doesn't work. rxfax <-> mediatrix - worked once or so, the rest failed. txfax <-> mediatrix - doesn't work. BTW, just FYI I did tests with latest mediatrix firmware 5.0.15.92 > _______________________________________________ > Openpbx-users mailing list > [email protected] > http://lists.openpbx.org/mailman/listinfo/openpbx-users _______________________________________________ Openpbx-users mailing list [email protected] http://lists.openpbx.org/mailman/listinfo/openpbx-users
