There is no T.38 gateway support in the RC3, and gw support in the trunk is very limited. Hopefully this will cahnge soon
xming Jbebeau wrote: > Luki, > > You diagram is correct. The T.38 stream is between the SPA1001 and OpenPBX. > This is EXACTLY what I want. > > The adapter is now a Linksys SPA1001 using FW 3.1.19SE, HW Rev 2.0.1. The > device seems to try doing T.38. When I hook it up to Asterisk 1.2.10, > Asterisk tells me it "doesn't know how to do T.38" when the fax machine tries > to send; a voice call works correctly. > > It seems there is some support in Asterisk for T.38, in some release or svn, > but it's unclear to me exactly what support and in which source. It also > seems that the Gateway functon, to the PSTN is available only in OpenPBX. > > Jon > > > -----Original message----- > From: Luki [EMAIL PROTECTED] > Date: Fri, 16 Feb 2007 01:27:19 -0500 > To: "OpenPBX.org Users Mailing List - Non-Commercial > Discussion"[email protected] > Subject: Re: [Openpbx-users] OpenPBX 1.2 RC3 as PSTN gateway? > > >>> 2) Will the configuration above, real-fax-machine to the PSTN work? >>> >> As far as I know the Sipura 1001 does not support T.38. The 210X >> series does. The T.38 transmission would be between the Sipura and >> OpenBPX, so essentially the PBX box has to convert T.38 <-> PRI/T1. >> >> Did I get that right? If so, I'd love to hear if that's already >> possible as well :). >> >> --Luki >> _______________________________________________ >> Openpbx-users mailing list >> [email protected] >> http://lists.openpbx.org/mailman/listinfo/openpbx-users >> > _______________________________________________ > Openpbx-users mailing list > [email protected] > http://lists.openpbx.org/mailman/listinfo/openpbx-users > _______________________________________________ Openpbx-users mailing list [email protected] http://lists.openpbx.org/mailman/listinfo/openpbx-users
