I am new to this list, and did not find anything in the archives about this....
I am running Centos 4.4, and believe I have the necessary modules installed and ready to configure OpenPBX. Initially for spanDSP, I just grapped the rpm from my Trixbox system. Turns out that is a little older than OpenPBX wants... I get the message: configure: error: SpanDSP version 0.0.3pre27 or newer is required to compile OpenPBX.org. OK. So I look around and there on http://dl.atrpms.net/sl4-i386/atrpms/stable/, I find spandsp-0.0.3-6_pre27.el4.at.i386.rpm GREAT. This is newer than asked for. I grapped the rpm and did a rpm -Uhv spandsp-0.0.3-6_pre27.el4.at.i386.rpm And I STILL get the same error. So I looked again at the wiki page http://wiki.openpbx.org/tiki-index.php?page=Easy%20route%20to%20building%20OpenPBX.org (where I first got the information to put together my OpenPBX effort), and again read the spanDSP section. Not really knowing what I was doing I did the following: Edit or create /etc/ld.so.conf to include /usr/local run 'ldconfig' I took that to mean my /etc/ld.so.conf is: include ld.so.conf.d/*.conf /usr/ofed/lib /usr/local and I then did: ldconfig I then again ran the configure and got the same error.... Oh, my configure command is: /configure --with-cdr_mysql --with-chan_unicall --with-chan_fax --with-app_valetparking --enable-t38 --enable-generic-jb --enable-mysql --enable-iax-trunking --with-app_txfax --with-app_rxfax --enable-transnexusosp --enable-srtp --with-app_ldap --with-res_config_mysql BTW, my reason for working with OpenPBX is the T.38 support. _______________________________________________ Openpbx-users mailing list [email protected] http://lists.openpbx.org/mailman/listinfo/openpbx-users
