Thanks! see below... Rodrigo Gonzalez wrote: > Robert Moskowitz wrote: > >> I am new to this list, and did not find anything in the archives about >> this.... >> >> I am running Centos 4.4, and believe I have the necessary modules >> installed and ready to configure OpenPBX. >> >> Initially for spanDSP, I just grapped the rpm from my Trixbox system. >> Turns out that is a little older than OpenPBX wants... >> >> I get the message: >> >> configure: error: SpanDSP version 0.0.3pre27 or newer is required to >> compile OpenPBX.org. >> >> >> OK. So I look around and there on >> http://dl.atrpms.net/sl4-i386/atrpms/stable/, I find >> spandsp-0.0.3-6_pre27.el4.at.i386.rpm >> >> GREAT. This is newer than asked for. >> >> I grapped the rpm and did a rpm -Uhv spandsp-0.0.3-6_pre27.el4.at.i386.rpm >> >> And I STILL get the same error. >> >> So I looked again at the wiki page >> http://wiki.openpbx.org/tiki-index.php?page=Easy%20route%20to%20building%20OpenPBX.org >> >> (where I first got the information to put together my OpenPBX effort), >> and again read the spanDSP section. Not really knowing what I was doing >> I did the following: >> >> Edit or create /etc/ld.so.conf to include /usr/local >> run 'ldconfig' >> >> I took that to mean my /etc/ld.so.conf is: >> >> include ld.so.conf.d/*.conf >> /usr/ofed/lib >> /usr/local >> >> and I then did: >> >> ldconfig >> >> I then again ran the configure and got the same error.... >> >> Oh, my configure command is: >> >> /configure --with-cdr_mysql --with-chan_unicall --with-chan_fax >> --with-app_valetparking --enable-t38 --enable-generic-jb --enable-mysql >> --enable-iax-trunking --with-app_txfax --with-app_rxfax >> --enable-transnexusosp --enable-srtp --with-app_ldap --with-res_config_mysql >> >> BTW, my reason for working with OpenPBX is the T.38 support. >> >> >> _______________________________________________ >> Openpbx-users mailing list >> [email protected] >> http://lists.openpbx.org/mailman/listinfo/openpbx-users >> >> > > You need the devel rpm too > > http://dl.atrpms.net/sl4-i386/atrpms/stable/spandsp-devel-0.0.3-6_pre27.el4.at.i386.rpm Not just spandsp-devel also
dl.atrpms.net/sl4-i386/atrpms/stable/libspandsp-0.0.3_0-0.0.3-6_pre27.el4.at.i386.rpm configure is done, it seems. Now on to the next step! _______________________________________________ Openpbx-users mailing list [email protected] http://lists.openpbx.org/mailman/listinfo/openpbx-users
