Scott Tomer wrote: > It took me a while to realize that you were not joking with the FAQ > comment. So, did you mean the FAQ at the bottom of this page > http://wiki.openpbx.org/tiki-index.php?page=Faxing%20with%20Openpbx.org > which has 7 questions and 2 answers. Or, more likely, did you mean > this FAQ http://www.soft-switch.org/spandsp_faq/ar01s09.html which > gives an answer without actually mentioning what the actual dimensions > are. Which apparently are 1728 X 2156 for a fine resolution fax and > 1728 X 1078 for a standard resolution fax. The 1728 is fixed. The number of pixels down the page will vary with the page length. > > So, assuming my last sentence makes a true statement, yes, I believe I > have figured out the key issue when it comes to SENDING fine or > standard resolution faxes. > > However, I am still unable to receive faxes. Any FAQs you can point > me to that will help with my problem there? > > Don't get me wrong, I am very appreciative of your efforts on this > project. However, I spent many hours reading your website, > openpbx.org and reading the mail list archives before posting my > question on the forum and again in the mailing list. And no where, > not even the FAQ linked to above, is the question "What is the > resolution of a standard res fax?" answered. That probably needs adding to the FAQ. :-\
Standard FAX is 204 pixels per inch across the page and 98 pixels per inch down the page. Fine FAX is 204 pixels per inch across the page and 196 pixels per inch down the page. Super-fine FAX is 204 pixels per inch across the page and 392 pixels per inch down the page. There are other resolutions for FAXes with different sized paper, but you rarely see these. Regards, Steve _______________________________________________ Openpbx-users mailing list [email protected] http://lists.openpbx.org/mailman/listinfo/openpbx-users
