Hi list,
sorry, I sent this mail some days ago, but somehow forgot to
append a subject line.
I'm trying to get a Pertosmart-1038 to work on OpenBSD, but
there's something going very wrong at this point. I just got
this one USB reader, so any other experiments I did were with
USB tokens, which worked quite well as far as OpenCT is
concerned.
Does anybody run this reader successfully at all? And if yes,
is this reader known to work reliable on, e.g. Linux or other
BSD's?
Thanks in advance,
/Markus
--------------------------------------------------------------
Here is some output (reader attached, SmartCard inserted):
fugu:ifd {172} sudo openct-control attach /dev/ugen0 usb:072f/9000
Debug: ifd_spawn_handler: driver=pertosmart1038, device=/dev/ugen0, index=-1
fugu:ifd {173} sudo openct-control status
No. Name Info
===================================================
0
fugu:ifd {175} sudo openct-tool list
0 (0 slots)
fugu:ifd {177} sudo openct-tool atr
Unknown reader #0
DEBUG OUTPUT
# /usr/local/sbin/ifdhandler -H -dddddddd -F pertosmart1038 /dev/ugen0
Debug: ifd_open: trying to open pertosmart1038@/dev/ugen0
Debug: ps_open: called: device name =/dev/ugen0
Debug: ifd_sysdep_device_type: BSD: ifd_sysdep_device_type(/dev/ugen0)
Debug: ifd_sysdep_device_type: BSD: returning IFD_DEVICE_TYPE_USB
Debug: ifd_sysdep_usb_claim_interface: interface=0 (not yet implemented)
Debug: usb_set_params: called. config xffffffff ifc x00 eps x02/x82
Debug: ifd_sysdep_usb_claim_interface: interface=0 (not yet implemented)
Debug: ps_transceive_instruction: called
Debug: ps_if_transmission_start: called
Debug: ps_send_to_ifd: called
Debug: ps_send_to_ifd: sending 0 bytes: 10
Debug: ps_if_transmission_send: called
Debug: ps_if_transmission_send: sending 64 bytes: 01 07 00 01
10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Debug: usb_send: usb send to=x02 b_send: send 01 07 00 01 10
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Debug: ifd_sysdep_usb_bulk: endpoint=2 direction=0
=> No further output on any openct-control/openct-tool command
_______________________________________________
opensc-devel mailing list
opensc-devel@lists.opensc-project.org
http://www.opensc-project.org/mailman/listinfo/opensc-devel
