Dear Douglas, Thanks for your response. I've read through the debug log before, but it didn't tell me much. Perhaps it will be more clear to you or someone else on the list, so I've attached it to this message.
The output you see in the file is generated by one "pkcs15-tool -D" command. I used the newer OpenSC 0.12.2 for Mac this time, but to no avail. Under Debian linux, my smart cards are still working properly, so this seems very strange. Kind regards, Thomas 2011/8/8 Douglas E. Engert <deeng...@anl.gov>: > > > On 8/7/2011 10:10 AM, Thomas De Reyck wrote: >> Dear OpenSC developers, >> >> Last month I've sent the below message to the opensc-user mailing list. >> However, the lack of a response suggests that no other user is aware of >> a solution to this problem. I am wondering if someone on this developer >> mailing list can perhaps have a look. If this is not the purpose of this >> mailing list, then I apologize. >> >> Either way, thank you in advance for having a look. > > Try turning on debugging in OpenSC. In the opensc.conf file set > debug = 7; > debug_file = /tmp/opensc-debug.log; > > This might show why it is marked as unsupported of why it is failing. > >> >> Kind regards, >> Thomas De Reyck >> >> -------- Original Message -------- >> Subject: SmartCafe Expert 3.2 72K works fine in some versions but is an >> "unsupported card" in other versions. >> Date: Tue, 12 Jul 2011 17:36:24 +0200 >> From: Thomas De Reyck<tho...@dereyck.eu> >> To: opensc-u...@lists.opensc-project.org >> >> Dear OpenSC users, >> >> I was wondering if any of you could assist me with the following: >> >> I have been able to set up the Muscle Applet on a SmartCafe Expert 3.2 >> 72K smartcard. My original >> experimentation was performed on a Debian Squeeze system, with the >> OpenSC provided by Debian. >> The OpenSC version used is: 0.11.13 (according to opensc-tool) >> >> However, an important aspect for this project, is having the smart >> card work on Mac OS X 10.6 as well. But >> here I have found the following issues: >> >> - Using the latest version of OpenSC for Mac: 0.12.1 >> - Source: >> http://www.opensc-project.org/files/opensc/OpenSC-0.12.1-10.6.dmg >> - Installation works fine, however, when I try to work with the >> card, it is unsupported: >> >>> pkcs15-tool -D >>> Using reader with a card: OmniKey CardMan 3121 00 00 >>> PKCS#15 binding failed: Unsupported card >> >> - Can read ATR from opensc-tool. >> - PKCS#11 module doesn't work. >> - OpenSC.tokend doesn't work either. >> >> >> - Using the latest SCA deprecated version: SCA-0.2.8 >> - Source: http://www.opensc-project.org/files/sca/sca-0.2.8.dmg >> - Installation works fine. >> - pkcs15-tool -D works fine. >> - Can read ATR from opensc-tool. >> - Tokend works on 32-bit based systems, but does not work on 64-bit >> systems. Probably normal, since this is a deprecated version. >> - PKCS#11 module works fine in Firefox and Adobe Reader. >> >> >> - Just for testing: When I use a Windows 7 computer, and install >> either the 32- or 64-bit version, I also get the "Unsupported Card" >> error >> on that computer. >> >> Of course, it is my goal to have this working with a recent version, >> with both PKCS#11 and tokend support. Perhaps PKCS#11 and tokend >> are functional in the latest available version, but because of the >> "Unsupported Card" error, I cannot test this. >> >> Is there any way to mark my card as supported? Can I do so myself? Do >> I need to report this as a bug? >> Should I perhaps forward this request somewhere else? >> >> Thank you in advance, >> Thomas De Reyck >> >> >> >> More Info: >> Smartcard: >> http://www.smartcardfocus.com/shop/ilp/id~521/SmartCafe_Expert_3_2_72K/p/index.shtml >> ATR: 3b:f7:18:00:00:80:31:fe:45:73:66:74:65:2d:6e:66:c4 >> _______________________________________________ >> opensc-devel mailing list >> opensc-devel@lists.opensc-project.org >> http://www.opensc-project.org/mailman/listinfo/opensc-devel >> >> > > -- > > Douglas E. Engert <deeng...@anl.gov> > Argonne National Laboratory > 9700 South Cass Avenue > Argonne, Illinois 60439 > (630) 252-5444 > _______________________________________________ > opensc-devel mailing list > opensc-devel@lists.opensc-project.org > http://www.opensc-project.org/mailman/listinfo/opensc-devel > _______________________________________________ opensc-devel mailing list opensc-devel@lists.opensc-project.org http://www.opensc-project.org/mailman/listinfo/opensc-devel
