There was no attachment. On 8/10/2011 7:51 AM, Thomas De Reyck wrote: > Dear Douglas, > > Thanks for your response. I've read through the debug log > before, but it didn't tell me much. Perhaps it will be more clear > to you or someone else on the list, so I've attached it to this message. > > The output you see in the file is generated by one "pkcs15-tool -D" command. > I used the newer OpenSC 0.12.2 for Mac this time, but to no avail. > > Under Debian linux, my smart cards are still working properly, so this > seems very strange. > > Kind regards, > Thomas > > 2011/8/8 Douglas E. Engert<deeng...@anl.gov>: >> >> >> On 8/7/2011 10:10 AM, Thomas De Reyck wrote: >>> Dear OpenSC developers, >>> >>> Last month I've sent the below message to the opensc-user mailing list. >>> However, the lack of a response suggests that no other user is aware of >>> a solution to this problem. I am wondering if someone on this developer >>> mailing list can perhaps have a look. If this is not the purpose of this >>> mailing list, then I apologize. >>> >>> Either way, thank you in advance for having a look. >> >> Try turning on debugging in OpenSC. In the opensc.conf file set >> debug = 7; >> debug_file = /tmp/opensc-debug.log; >> >> This might show why it is marked as unsupported of why it is failing. >> >>> >>> Kind regards, >>> Thomas De Reyck >>> >>> -------- Original Message -------- >>> Subject: SmartCafe Expert 3.2 72K works fine in some versions but is an >>> "unsupported card" in other versions. >>> Date: Tue, 12 Jul 2011 17:36:24 +0200 >>> From: Thomas De Reyck<tho...@dereyck.eu> >>> To: opensc-u...@lists.opensc-project.org >>> >>> Dear OpenSC users, >>> >>> I was wondering if any of you could assist me with the following: >>> >>> I have been able to set up the Muscle Applet on a SmartCafe Expert 3.2 >>> 72K smartcard. My original >>> experimentation was performed on a Debian Squeeze system, with the >>> OpenSC provided by Debian. >>> The OpenSC version used is: 0.11.13 (according to opensc-tool) >>> >>> However, an important aspect for this project, is having the smart >>> card work on Mac OS X 10.6 as well. But >>> here I have found the following issues: >>> >>> - Using the latest version of OpenSC for Mac: 0.12.1 >>> - Source: >>> http://www.opensc-project.org/files/opensc/OpenSC-0.12.1-10.6.dmg >>> - Installation works fine, however, when I try to work with the >>> card, it is unsupported: >>> >>>> pkcs15-tool -D >>>> Using reader with a card: OmniKey CardMan 3121 00 00 >>>> PKCS#15 binding failed: Unsupported card >>> >>> - Can read ATR from opensc-tool. >>> - PKCS#11 module doesn't work. >>> - OpenSC.tokend doesn't work either. >>> >>> >>> - Using the latest SCA deprecated version: SCA-0.2.8 >>> - Source: http://www.opensc-project.org/files/sca/sca-0.2.8.dmg >>> - Installation works fine. >>> - pkcs15-tool -D works fine. >>> - Can read ATR from opensc-tool. >>> - Tokend works on 32-bit based systems, but does not work on 64-bit >>> systems. Probably normal, since this is a deprecated version. >>> - PKCS#11 module works fine in Firefox and Adobe Reader. >>> >>> >>> - Just for testing: When I use a Windows 7 computer, and install >>> either the 32- or 64-bit version, I also get the "Unsupported Card" >>> error >>> on that computer. >>> >>> Of course, it is my goal to have this working with a recent version, >>> with both PKCS#11 and tokend support. Perhaps PKCS#11 and tokend >>> are functional in the latest available version, but because of the >>> "Unsupported Card" error, I cannot test this. >>> >>> Is there any way to mark my card as supported? Can I do so myself? Do >>> I need to report this as a bug? >>> Should I perhaps forward this request somewhere else? >>> >>> Thank you in advance, >>> Thomas De Reyck >>> >>> >>> >>> More Info: >>> Smartcard: >>> http://www.smartcardfocus.com/shop/ilp/id~521/SmartCafe_Expert_3_2_72K/p/index.shtml >>> ATR: 3b:f7:18:00:00:80:31:fe:45:73:66:74:65:2d:6e:66:c4 >>> _______________________________________________ >>> opensc-devel mailing list >>> opensc-devel@lists.opensc-project.org >>> http://www.opensc-project.org/mailman/listinfo/opensc-devel >>> >>> >> >> -- >> >> Douglas E. Engert<deeng...@anl.gov> >> Argonne National Laboratory >> 9700 South Cass Avenue >> Argonne, Illinois 60439 >> (630) 252-5444 >> _______________________________________________ >> opensc-devel mailing list >> opensc-devel@lists.opensc-project.org >> http://www.opensc-project.org/mailman/listinfo/opensc-devel >> > _______________________________________________ > opensc-devel mailing list > opensc-devel@lists.opensc-project.org > http://www.opensc-project.org/mailman/listinfo/opensc-devel > >
-- Douglas E. Engert <deeng...@anl.gov> Argonne National Laboratory 9700 South Cass Avenue Argonne, Illinois 60439 (630) 252-5444 _______________________________________________ opensc-devel mailing list opensc-devel@lists.opensc-project.org http://www.opensc-project.org/mailman/listinfo/opensc-devel
