Hi, On Tue, 2004-03-30 at 00:26, Hentschel, Bernd wrote: > Hi all, > > I recently tried to setup an OpenSG configuration for a holobench projection > device > (which basically consitst of two orthogonal projection screens). > I used OSG::ProjectionCameraDecorator for this task, as recommended by the > docs. > The projection on the vertical screen worked just fine from the first moment > on, > but on the horizontal one I still don't see any picture. Since I've tried > this > for some time now and don't see any progress, I wanted to ask if anyone of > you does > know about usefull ressources about such a setup (...source code of an > example, telling > a little more than the testProjection-tests from the OSG distribution, would > do perfectly well). >
in principal this should not be a problem I run OpenSG besides other things on a 3-Pipe curved screen and it works pretty well. Could you send me the surface parameters for your walls than I could give it try over here and see what is happening. After we are sure the basic parameters work we can go on and look into your code if it still does not run at your place. regards, gerrit ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Opensg-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/opensg-users
