Hi Sajjadul, with the current cvs version you can try it with the scons build system. Just type ./scons in the OpenSG directory.
Andreas > Hi, > > On Tue, 2007-03-13 at 10:47 +0100, Sajjadul Islam wrote: > >> >>Gerrit Voss >>Mon, 12 Mar 2007 20:30:59 -0800 >> >>Hi, >> >>looking at your make output, this seems to be a problem with your >>version of gmake. Could you run gmake -v and send the output. >> >>thanks >> gerrit >> >> >>Thats the output i get after i run make -v, i compiled OpenSceneGraph >>with that make utility, was wondering if that same one should be working >>for OpenSG. > > > this depends a little bit on the OpenSG version you are using. If you > are using a current CVS / dailybuild version it should work. > If you are using 1.6 I would expect the errors you see. > > If you are using 1.6 and don't want to upgrade you could try the > following : > > In Common/commonBuildDetect.mk at the end after > > ifeq ($(MAKEMINOR),80) > MAKE_OLD_DOLLAR := 0 > endif > > add > > ifeq ($(MAKEMINOR),81) > MAKE_OLD_DOLLAR := 0 > endif > > regards, > gerrit > > > > ********************************************** > > Hello gerrit, > > Thanks for the suggestion , i did that as you specified by editing the > Common/commonBuildDetect.mk file. > > And then configured with the following command : > > > [EMAIL PROTECTED]:~/openSG/OpenSG$ ./configure --enable-glut > --with-glutincludedir=/usr/include/GL/ --with-glutlibdir=/usr/lib64/ > --enable-png --with-pngincludedir=/usr/include/ > --with-pnglibdir=/usr/lib64/ --enable-jpg > --with-jpgincludedir=/usr/include/ --with-jpglibdir=/usr/lib64/ > --enable-tif --with-tifincludedir=/usr/include/ > --with-tiflibdir=/usr/lib64/ --enable-qt > --with-qtincludedir=/usr/include/qt3/ --with-qtlibdir=/usr/share/qt3/lib/ > > > then make opt And > > at last make install > > > during make opt there were several warning and some errors as well and > at the end it said directory opt couldnt be remade because of errors > > > then i ran the command make install and it seemed to work fine without > errors. > > i edited the /etc/profile and updated the LD_LIBRARY_PATH > > > but getting error with compiling a sample program and the error is : > > [EMAIL PROTECTED]:~/openSG/opSG$ make firstOSG > g++ -O2 -L/usr/lib64/ -L/usr/lib64/ -L/usr/lib64/ -L/usr/lib64/ > -L/usr/local/lib/opt -lOSGWindowGLUT -lOSGSystem -lOSGBase -ltiff -ljpeg > -lpng -lz -lglut -lGLU -lGL -lXmu -lXi -lXt -lX11 -lpthread -ldl -lm > -L/usr/X11R6/lib64 -o firstOSG > /usr/bin/ld: cannot find -lOSGWindowGLUT > collect2: ld returned 1 exit status > make: *** [firstOSG] Error 1 > > > then i checked the directory /usrlocal/lib/opt and there is only one > library libOSGBase.so > > libOSGWindowGLUT.so is not there or anywhere in the system. > > > so i am kinda sure that make opt got problem..... > > > I really do need help in that issue. It has been several days and i > couldnt even get a start with OpenSG > > > > Regards, > > Sajjad > > > ------------------------------------------------------------------------- > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to share your > opinions on IT & business topics through brief surveys-and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > _______________________________________________ > Opensg-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/opensg-users > -- VREC Robert-Bosch-Straße 7 D-64293 Darmstadt Tel. 06151-4921035 ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Opensg-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/opensg-users
