For me, I am more or less curious not in your Regions.ini file.. but your OpenSim.ini and OpenSim.Server.ini if your running in Grid mode. someday I have a dream of running Grid mode with hyperGrid turned on.. hahahaha
sonya On Thu, Jan 28, 2010 at 11:50 PM, Master_Mirage <[email protected]>wrote: > > I have managed to clone 30 regions that are allready developed using OAR > copys. I thought there may be interest in the steps i took that worked. > The 1st thing i did was to layout a 5x6 mega region on its own instance. > Dont combine at this point. Use fresh region UUIDS and new names for each. > I > then went and set each region's land settings and media settings as well as > the land textuers. I chose to do a terrain fill 23 as well. Note: Its best > to not set autoreturn at this point. The i made an oar i called blank.oar > (With luck you wount ever need it). > 2. Next was to restore the OARs i made of the regions i wanted to clone and > be part of the megaregion. (30 in this case). Restore them slowly making > shure the asset server keeps up with the OAR. Its tempting to rush but a > bad > idea as i found out on the 1st try of this! > 3. Login and check each region carefully for any oops w. the oar restores > (ignore ground textuers thay will end up changing to what you used in the > 1st step not what is in the oar after the instance is restarted as > combined). At this point should you see anything wrong this is your last > change to fix it, if so simply reload the oar again or make a new one and > resore (sometimes the OAR may not be right). Once i was shure all was well > i > shut the instance down and reloaded normaly. I did another quick check of > the regions. Remember this is your last chance to fix anything major! So > take your time and look. > 4. Shut it down again and change the setting in the ini. and restart > it will take it about 5x longer than normal to load than it did normaly. > You > will see alot of errors about oject crossing boundrys for a bit (dont > panic). In my case the 30 regions held around 80k objects and a few K in > scripts. Mixed bag of stuff from simple to complex objects. Eventualy the > errors stop and a bit after finnishes the loading. > Its ok to log in at this point and have a look around, you will see > somethings may be missing or phantom > that may not be case though. Alot of things can make it look like that but > realy there ok. Client cache and other things can make it seem like that > too. The phntom prims are fixed w. a console command fix phantom objects. > Its a slow process in my case due to how many objects there are. In my case > it did fix all the phantom stuff as well as missing prims (not shure why > but > thay poped into view anyway). > I checked each region 1 by one noting any goof's down (verry minor ones in > my case). > I shutdown the instance again. I clear my client cache and changed the > instance caching from cermone to flotsum. I thought it best not to start > out > with flotsum knowing this would be massive. > Restarted the instance (yes you will still see the object boundry crossing > errors and it still takes awhile to load it all). By doing it in this > order > i was happy to have a working 30region to 30sector MegaRegion. > There are alot of tweeks that should be done in the ini but thats another > post totaly. > There is a side effect to this if you still run your old regions that may > have had parcles. Thay are Copyed not cloned! and will revert to unparcled > and back to the region owner. The clone's MEGAREGION parcles will be ok > though. Why that is im not shure yet. > As this was a TEST and dident actualy expect it to work at all. I was happy > with it. If anyone should try this Keep it in mind that theres 1000 things > that can go wrong doing this and i am just saying what I did that gave ME a > happy result. Please feel free to add to this or any suggestions that i > may > have glossed over here. > -- > View this message in context: > http://n2.nabble.com/Making-A-30region-clone-to-a-30-sector-Mega-region-tp4478270p4478270.html > Sent from the opensim-users mailing list archive at Nabble.com. > _______________________________________________ > Opensim-users mailing list > [email protected] > https://lists.berlios.de/mailman/listinfo/opensim-users >
_______________________________________________ Opensim-users mailing list [email protected] https://lists.berlios.de/mailman/listinfo/opensim-users
