Ok I have almost finished the Debian 5 OpenSim 6.8 ( Post Fixes ) + Mono 2.4.2.3 install and setup tutorial. I have included info on installing MySQL and PHPMyAdmin and Apache2. More on that as soon as I finish it up which I should have ready in a couple days. I also got GROUPS to work with my Grid and it seems to be stable. So i'll write up that second part as soon as I can.
Hope this will help all who needs this. John Mieske On Fri, Jan 29, 2010 at 8:50 PM, John Mieske <[email protected]> wrote: > I agree and I have already tested this.. it seems to work, but at the time > I had some other issues, so I was not sure.. > > And i agree, NEVER run the client on the same computer as the server / grid > / standalone. More issues arise because of that. I am also rewriting the > Debian 5 tutorial. Once I get this finished, i'll find somewhere I can post > this for all. > > John > > > On Fri, Jan 29, 2010 at 5:30 PM, Jane Foxclaw <[email protected]>wrote: > >> Are you running >> OpenSim.Grid.UserServer.exe >> OpenSim.Server.exe >> OpenSim.Grid.MessagingServer.exe on one computer and the >> OpenSim.exe on another computer ? That would seperate the two so that one >> computer wont be overloaded. Just wondering if its even possible ? >> >> >> On Fri, Jan 29, 2010 at 2:38 AM, Master_Mirage <[email protected]>wrote: >> >>> >>> Yes it was done while in full grid mode ROBUST and MYSQL services. The >>> computer is lan connected to the GRID services and co-exist w. my public >>> grid. I dont think it matters that mutch as the the process of what i did >>> would still be the same. I havent tryed it in standalone mode, i think >>> the >>> setps would be the same. You would need to be using MYSQL server and not >>> on >>> the same box your running the instance on. Mysql will use alot of the >>> instance's resources and the instance needs every drop of computing power >>> it >>> can get! Also you should not run your client on the same box as your >>> instance is on, not of this size anyway for the same resion. >>> >>> Jane Foxclaw wrote: >>> > >>> > For me, I am more or less curious not in your Regions.ini file.. but >>> your >>> > OpenSim.ini and OpenSim.Server.ini if your running in Grid mode. >>> someday I >>> > have a dream of running Grid mode with hyperGrid turned on.. hahahaha >>> > >>> > sonya >>> > >>> > On Thu, Jan 28, 2010 at 11:50 PM, Master_Mirage >>> > <[email protected]>wrote: >>> > >>> >> >>> >> I have managed to clone 30 regions that are allready developed using >>> OAR >>> >> copys. I thought there may be interest in the steps i took that >>> worked. >>> >> The 1st thing i did was to layout a 5x6 mega region on its own >>> instance. >>> >> Dont combine at this point. Use fresh region UUIDS and new names for >>> >> each. >>> >> I >>> >> then went and set each region's land settings and media settings as >>> well >>> >> as >>> >> the land textuers. I chose to do a terrain fill 23 as well. Note: Its >>> >> best >>> >> to not set autoreturn at this point. The i made an oar i called >>> blank.oar >>> >> (With luck you wount ever need it). >>> >> 2. Next was to restore the OARs i made of the regions i wanted to >>> clone >>> >> and >>> >> be part of the megaregion. (30 in this case). Restore them slowly >>> making >>> >> shure the asset server keeps up with the OAR. Its tempting to rush but >>> a >>> >> bad >>> >> idea as i found out on the 1st try of this! >>> >> 3. Login and check each region carefully for any oops w. the oar >>> restores >>> >> (ignore ground textuers thay will end up changing to what you used in >>> the >>> >> 1st step not what is in the oar after the instance is restarted as >>> >> combined). At this point should you see anything wrong this is your >>> last >>> >> change to fix it, if so simply reload the oar again or make a new one >>> and >>> >> resore (sometimes the OAR may not be right). Once i was shure all was >>> >> well >>> >> i >>> >> shut the instance down and reloaded normaly. I did another quick check >>> of >>> >> the regions. Remember this is your last chance to fix anything major! >>> So >>> >> take your time and look. >>> >> 4. Shut it down again and change the setting in the ini. and restart >>> >> it will take it about 5x longer than normal to load than it did >>> normaly. >>> >> You >>> >> will see alot of errors about oject crossing boundrys for a bit (dont >>> >> panic). In my case the 30 regions held around 80k objects and a few K >>> in >>> >> scripts. Mixed bag of stuff from simple to complex objects. Eventualy >>> the >>> >> errors stop and a bit after finnishes the loading. >>> >> Its ok to log in at this point and have a look around, you will see >>> >> somethings may be missing or phantom >>> >> that may not be case though. Alot of things can make it look like that >>> >> but >>> >> realy there ok. Client cache and other things can make it seem like >>> that >>> >> too. The phntom prims are fixed w. a console command fix phantom >>> objects. >>> >> Its a slow process in my case due to how many objects there are. In my >>> >> case >>> >> it did fix all the phantom stuff as well as missing prims (not shure >>> why >>> >> but >>> >> thay poped into view anyway). >>> >> I checked each region 1 by one noting any goof's down (verry minor >>> ones >>> >> in >>> >> my case). >>> >> I shutdown the instance again. I clear my client cache and changed the >>> >> instance caching from cermone to flotsum. I thought it best not to >>> start >>> >> out >>> >> with flotsum knowing this would be massive. >>> >> Restarted the instance (yes you will still see the object boundry >>> >> crossing >>> >> errors and it still takes awhile to load it all). By doing it in this >>> >> order >>> >> i was happy to have a working 30region to 30sector MegaRegion. >>> >> There are alot of tweeks that should be done in the ini but thats >>> another >>> >> post totaly. >>> >> There is a side effect to this if you still run your old regions that >>> may >>> >> have had parcles. Thay are Copyed not cloned! and will revert to >>> >> unparcled >>> >> and back to the region owner. The clone's MEGAREGION parcles will be >>> ok >>> >> though. Why that is im not shure yet. >>> >> As this was a TEST and dident actualy expect it to work at all. I was >>> >> happy >>> >> with it. If anyone should try this Keep it in mind that theres 1000 >>> >> things >>> >> that can go wrong doing this and i am just saying what I did that gave >>> ME >>> >> a >>> >> happy result. Please feel free to add to this or any suggestions that >>> i >>> >> may >>> >> have glossed over here. >>> >> -- >>> >> View this message in context: >>> >> >>> http://n2.nabble.com/Making-A-30region-clone-to-a-30-sector-Mega-region-tp4478270p4478270.html >>> >> Sent from the opensim-users mailing list archive at Nabble.com. >>> >> _______________________________________________ >>> >> Opensim-users mailing list >>> >> [email protected] >>> >> https://lists.berlios.de/mailman/listinfo/opensim-users >>> >> >>> > >>> > _______________________________________________ >>> > Opensim-users mailing list >>> > [email protected] >>> > https://lists.berlios.de/mailman/listinfo/opensim-users >>> > >>> > >>> >>> -- >>> View this message in context: >>> http://n2.nabble.com/Making-A-30region-clone-to-a-30-sector-Mega-region-tp4478270p4478700.html >>> Sent from the opensim-users mailing list archive at Nabble.com. >>> _______________________________________________ >>> Opensim-users mailing list >>> [email protected] >>> https://lists.berlios.de/mailman/listinfo/opensim-users >>> >> >> >> _______________________________________________ >> Opensim-users mailing list >> [email protected] >> https://lists.berlios.de/mailman/listinfo/opensim-users >> >> >
_______________________________________________ Opensim-users mailing list [email protected] https://lists.berlios.de/mailman/listinfo/opensim-users
