For an overview, see here:
http://opensimulator.org/wiki/Configuration#Standalone_vs._Grid
Basically, a standalone does not allow others to connect their region to
your simulator, while a grid does. This has nothing to do with people
visiting it.
I once made a small glossary on OpenSim terms that might be helpful:
http://opensim-creations.com/2010/07/15/the-road-to-open-simulator-part-i/
Sláinte
V
I believe you can create as many regions as you like in a standalone but
you are the only person that can go there
I have created both and to have other ppl come to visit you need to be a
grid
TC
Gary
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of GUARDIAN
Sent: Thursday, August 18, 2011 1:20 PM
To: [email protected]; [email protected]
Subject: Re: [Opensim-users] Awaiting region handshake
Thanks Gunther, but I'm installing a new router this weekend which
should resolve the issue.
While I wait, is there a page somewhere that explains the differences
between standalone and grid?
I'm guessing standalone is limited to a single region?
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of R. Gunther
Sent: Friday, 19 August 2011 1:07 a.m.
To: [email protected]
Subject: Re: [Opensim-users] Awaiting region handshake
On Thu, 2011-08-18 at 18:25 +1200, GUARDIAN wrote:
Unfortunatly this did not work, after moving the server to the DMZ,
Robust starts fine, but opensim failes with:
exception occured on sending request to
http://myname.dyndns.org:8003/presence: System.Net.WebException:
Error: NameResolutionFailure
I can get to http://myname.dyndns.org:8003/presence fine my end, it
brings up the hippo page, so I’m guessing that it’s the router again,
not looping back.
Have you tried it without dyndns. its sometimes buggy and keep wrong ip.
Or the world get the wrong ip if the resolv your dyndns.
So replace your dyndns lines for the right ip's and see if that helps.
Region handshake problems is almost always the problem with wrong ip, Or
wrong internel ip in the ini file.
have you set InternalAddress to 0.0.0.0 ?
_______________________________________________
Opensim-users mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/opensim-users
_______________________________________________
Opensim-users mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/opensim-users
_______________________________________________
Opensim-users mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/opensim-users
--
The Twilight’s Green Illuminate Beam,
This Great ImBalance, that I’ve seen,
That Trees Got Icy Branches and,
The Good In Bad, That God I’ve Been.
http://tgib.co.uk/
_______________________________________________
Opensim-users mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/opensim-users
