Heya James,
On 2/17/07, James C. McPherson <[EMAIL PROTECTED]> wrote:
Jeremy Teo wrote:
> a successful install of NV57 results in a panic after bootup: error
> messages as shown below (painstakingly captured by hand)
>
> ereport.cpu.amd.nb.wdog ena=204cae318e00001 detector=[ version=0
> scheme="hc" hc-list=[...] ] bank_status=b200000000070f0f bank-number=4
> addr=80180c080 add-valid=0 ip=0 privileged=1
>
> panic[cpu0]/thread=d2dcbde0: Unrecoverable Machine Check Exception
>
> d2dcbc9c unix:cmi_mca_trap+46 (d2dcbca8)
> d2dcbca8 unix:mcetrap+5a (fec301b0, d96f0000,)
> d2dcbd00 unix:ddi_io_get8+13 )d5baac00)
> d2dcbd14 ata:ata_get_status+6f (d5baac00, d2dcbd5c)
> d2dcbd40 ata:ghd_intr+47 (d5baac94, d2dcbd5c)
> d2dcbd60 ata:ata_intr+22 (d5baac00,0)
> d2dcbdac unix:av_dispatch_autovect+69 (f)
> d2dcbdcc unix:dispatch_hardint+1a(f,0)
>
> Any ideas? I've tried force-booting into 32 bit mode, disabling the CPU
> specific module (mentioned by gavinm some time back), as well as disabling
> HAL, (suspecting that it may be due to bug 6491248
>
> FWIW, i was installing over a old build of 48 which was working fine.
Hi Jeremy,
that does look like
6491248 x2100 (Aquarius) crashes when running snv_51.
The mce is important, I think. The MCE (Machine Check Exception)
indicates that there's something quite weird going on.
> ereport.cpu.amd.nb.wdog
that'll be the watchdog on the northbridge of your cpu. As to
why you're getting that ... I don't know for sure but I'm suspecting
your cd/dvd datapath. Were you able to capture a crash dump?
Good news: yes i captured a crash dump. Bad news: I only have 1
solaris box (the one with NV57)
I'll be installing b50 and see if that works. I'll then narrow it down
from there.
--
Regards,
Jeremy
_______________________________________________
opensolaris-discuss mailing list
[email protected]
