Hi,
I've just got a couple of Supermicro PDSME boards to build a couple of
Solaris boxes to use as NAS devices.
These boards have 2 x Intel single-port 82573 PCI-E Gigabit Ethernet
Controllers.
I've installed SXCE b77 on one of these boards and no driver seems to be
loaded for these NICs.
prtconf -pv shows two Ethernet controllers:
Node 0x000020
assigned-addresses:
82050010.00000000.ed800000.00000000.00020000.81050018.00000000.00008000.00000000.00000020
reg:
00050000.00000000.00000000.00000000.00000000.02050010.00000000.00000000.00000000.00020000.01050018.00000000.00000000.00000000.00000020
compatible: 'pciex8086,108c.15d9.108c.3' +
'pciex8086,108c.15d9.108c' + 'pciex8086,108c.3' + 'pciex8086,108c' +
'pciexclass,020000' + 'pciexclass,0200' + 'pci8086,108c.15d9.108c.3' +
'pci8086,108c.15d9.108c' + 'pci15d9,108c' + 'pci8086,108c.3' +
'pci8086,108c' + 'pciclass,020000' + 'pciclass,0200'
model: 'Ethernet controller'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000001
subsystem-vendor-id: 000015d9
subsystem-id: 0000108c
unit-address: '0'
class-code: 00020000
revision-id: 00000003
vendor-id: 00008086
device-id: 0000108c
pcie-capid-pointer: 000000e0
pcie-capid-reg: 00000001
name: 'pci15d9,108c'
Node 0x000021
assigned-addresses:
82060010.00000000.ed900000.00000000.00020000.81060018.00000000.00009000.00000000.00000020
reg:
00060000.00000000.00000000.00000000.00000000.02060010.00000000.00000000.00000000.00020000.01060018.00000000.00000000.00000000.00000020
compatible: 'pciex8086,109a.15d9.109a.0' +
'pciex8086,109a.15d9.109a' + 'pciex8086,109a.0' + 'pciex8086,109a' +
'pciexclass,020000' + 'pciexclass,0200' + 'pci8086,109a.15d9.109a.0' +
'pci8086,109a.15d9.109a' + 'pci15d9,109a' + 'pci8086,109a.0' +
'pci8086,109a' + 'pciclass,020000' + 'pciclass,0200'
model: 'Ethernet controller'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000001
subsystem-vendor-id: 000015d9
subsystem-id: 0000109a
unit-address: '0'
class-code: 00020000
revision-id: 00000000
vendor-id: 00008086
device-id: 0000109a
pcie-capid-pointer: 000000e0
pcie-capid-reg: 00000001
name: 'pci15d9,109a'
Now, it is my understanding that these NICs should be supported
"out-of-the-box" by the e1000g driver, but I could be wrong.
Any idea how to get my NICs working?
Thanks,
R.
_______________________________________________
opensolaris-discuss mailing list
[email protected]
