> > euclid# cfgadm -al > > Ap_Id Type Receptacle Occupant Condition > > sata0/0 sata-port empty unconfigured ok > > sata0/1 sata-port empty unconfigured ok > > sata1/0 sata-port empty unconfigured ok > > sata1/1 unknown connected unconfigured unknown > > Hmm, the Silicon Image S-ATA controller in your > system > has four S-ATA ports? > > Is the S-ATA DVD/CD writer the only device > connected to the S-ATA controller? In that case > the S-ATA DVD device seems to be connected at > "sata1/1". Apparently there is a device connected > on that port, but it wasn't identified as a S-ATA > disk device. In 6565894, the workaround uses > commands like "cfgadm -x sata_port_reset sata1/1" > to reset the S-ATA port. Did you try something > like that?
Here is the real kicker, I have 6 port onboard sata that does not show up with cfgadm and the si card is only two port, I have no idera how or why 4 ports are being reported. (maybe some high level math 6 - 2 = 4 ;} ) I have tried several workarounds including -x. At this point I may just do a re-install using build 115. -- This message posted from opensolaris.org _______________________________________________ opensolaris-discuss mailing list [email protected]
