Hello, I'm proceeding with upgrade from SXDE 1/08 (snv 79a) to OS 2009.06 and it seems I start to get issue with my board built in Marvel NICs. The board is Asus P5W64 WS Professional and it provides Marvel 88E8001 and 88E8052 chip based NICs. On SXDE I've used driver provided by the SysKonnect.de site (version 8.19.1.3) and both NICs were rock solid. I've tried the same on a new OS 2009.06 install, but suddenly I got an issue where one or second NIC just tell: Jun 10 06:49:37 silence skge: [ID 348342 kern.notice] skge1: Network connection down on port A Jun 10 06:49:39 silence skge: [ID 418734 kern.notice] skge1: Network connection up on port A Jun 10 06:49:39 silence skge: [ID 249518 kern.notice] Link Speed: 100 Mbps Jun 10 06:49:39 silence skge: [ID 966250 kern.notice] Autonegotiation: Yes Jun 10 06:49:39 silence skge: [ID 676895 kern.notice] Duplex Mode: Full Jun 10 06:49:39 silence skge: [ID 825410 kern.notice] Flow Control: Symmetric
Since this might be old driver issue, I've also attempted to test driver obtained directly from Marvell.com site (version 10.0.3.3) and the problem is the same: Jun 10 15:08:41 silence yukonx: [ID 348342 kern.notice] yukonx0: Network connection down on port A Jun 10 15:08:42 silence yukonx: [ID 418734 kern.notice] yukonx0: Network connection up on port A Jun 10 15:08:42 silence yukonx: [ID 249518 kern.notice] Link Speed: 100 Mbps Jun 10 15:08:42 silence yukonx: [ID 966250 kern.notice] Autonegotiation: Yes Jun 10 15:08:42 silence yukonx: [ID 676895 kern.notice] Duplex Mode: Full Jun 10 15:08:42 silence yukonx: [ID 825410 kern.notice] Flow Control: Symmetric Please note that skge1 and yukonx0 is the same 88E8001 NIC. (on sxde this was actually skge0). Do you have any idea what has happened in OS development between snv79a and snv111b that my NICs are not that good anymore? Thanks! Karel -- This message posted from opensolaris.org _______________________________________________ opensolaris-discuss mailing list [email protected]
