Hi Planning the following setup nxge1+nxge2+nxge3+nxge4 = aggr1 aggr10001 = vlan10 aggr20001 = vlan20 aggr30001 = vlan30 aggr40001 = vlan40
aggr10001:1 - interface for 1st zone in vlan10 aggr10001:2 - interface for 2nd zone in vlan10 etc On switch side LACP + trunking is configured, the problem is that now I am unable to boot the system on the network for install using jumpstart Is it supported in Solaris 10 to boot up from the network using a NIC card which is part of an aggregation, ie I would like to boot the system off network using the nxge4 interface. Any pointers is highly appreciated. Sorry for being OT -- This message posted from opensolaris.org
