> During install in stub domain F8,F9,CentOS 5.X load > "ata_piix" driver exactly as on old S478 Intel > Boards. > Compare with CR 6650131 i see same errors when > loading SNV_79,SNV_98 in stub domain : > ****************************************************** > ************************************* > Configuring /dev > ata_command: BSY too long!DRDY 0x1 CMD 0xe0 F 0x0 N > 0x0 S 0x0 H 0x0 CL 0x0 CH 0x0 > ****************************************************** > ************************************ > Dell 4550 mentined in CR 6650131 has board described > at:- > http://www.ascendtech.us/itemdesc.asp?ic=MB4DELJ0592 > > * Support for an Intel? Pentium? 4 processor in a > mPGA478 socket with a 400/533 MHz system bus > * Support for an Intel? Celeron? processor in a > mPGA478 socket with a 400 MHz system bus > Intel? 845PE Chipset > Two Parallel ATA IDE interfaces with UDMA 33, > ATA-66/100 support > > My guess would be , that current Nevada Builds won't > install on Intel S478 boards with mentioned ATA > specs, no matter of PC been built on the board with > Intel S478. (years 2000-2002). > However , Solaris 10 will. Unfortunately, i don't > have any Intel S478 board to test. *************************************** Failure reproduce CR 6650131 *************************************** I've made an attempt to reprodule CR 6650131 on the box assembled with:- CPU P4 2.6 GHZ 1 GB RAM Board : ECS (Elitegroup) 845PE-A 2 channel UltraDMA/100/66/33 Bus Master IDE (with support for up to 4 ATAPI-devices) 80 GB IDE Seagate Barracuda.
SNV_94 loaded with no problems and entered configuration phase. -- This message posted from opensolaris.org
