Has anyone else run into this, I have an HP ze4530 Celeron laptop and have noticed that if I plug in my usb mouse, logitech optical mouse, prior to system boot; the keyboard refuses to work. If however I wait until after the boot message about configuring devices, to plug in the usb mouse, then both keyboard and mouse will work.
here are some messages when the keyboard doesn't work Oct 28 14:41:49 mouser i8042: [ID 526150 kern.info] 8042 device: keyboard at 0, kb8042 # 0 Oct 28 14:41:49 mouser genunix: [ID 936769 kern.info] kb80420 is /isa/i8042 at 1,60/keyboard at 0 Oct 28 14:41:49 mouser i8042: [ID 526150 kern.info] 8042 device: mouse at 1, mouse8042 # 0 Oct 28 14:41:49 mouser genunix: [ID 936769 kern.info] mouse80420 is /isa/i8042 at 1,60/mouse at 1 Oct 28 14:41:50 mouser usba: [ID 349649 kern.info] Logitech USB Receiver Oct 28 14:41:50 mouser genunix: [ID 936769 kern.info] hid0 is /pci at 0,0/pci103c,2a at 2/device at 1/mouse at 0 Oct 28 14:41:50 mouser genunix: [ID 408114 kern.info] /pci at 0,0/pci103c,2a at 2/device at 1/mouse at 0 (hid0) online Here are some messages from when the keyboard does work. Oct 28 14:51:44 mouser genunix: [ID 936769 kern.info] pci_pci0 is /pci at 0,0/pci 1002,7010 at 1 Oct 28 14:51:44 mouser i8042: [ID 526150 kern.info] 8042 device: keyboard at 0, kb 8042 # 0 Oct 28 14:51:44 mouser genunix: [ID 936769 kern.info] kb80420 is /isa/i8042 at 1,60/keyboard at 0 Oct 28 14:51:44 mouser i8042: [ID 526150 kern.info] 8042 device: mouse at 1, mouse 8042 # 0 Oct 28 14:52:28 mouser usba: [ID 349649 kern.info] Logitech USB Receiver Oct 28 14:52:28 mouser genunix: [ID 936769 kern.info] hid1 is /pci at 0,0/pci103c,2a at 2/device at 1/input at 1 Oct 28 14:52:28 mouser genunix: [ID 408114 kern.info] /pci at 0,0/pci103c,2a at 2/device at 1/input at 1 (hid1) online IIRC, this combo did work at one time back around nvb50ish. Thanks for any pointers. This message posted from opensolaris.org
