Hi Thanks so much for the advices actually no i dont have a wireless
i have 2 other machines on a network one of them is a web and file server on The server is on 100 The other machine is on 103 This machine i intend to use as 102 or ill settle with 101 i just copied and pasted what you sent me fast becasue i was afraid i would get cut off during the submission of this reply lol i notice it happens when the load is a little heavy i will show you my hosts again # ident "@(#)hosts 1.7 06/08/01 SMI" # # Internet host table # 127.0.0.1 localhost loghost ::1 localhost loghost and here is my resolv.conf domain 24.25.4.140 nameserver 24.25.4.135 nameserver 224.25.4.140 nameserver 24.25.4.142 As an example lets say my pc machines on a network is Hostname = Lucid-Dreams isp name = wangotango.com wanabe-address = 192.158.16.102 router = 192.158.16.1 name servers 24.25.4.135 24.25.4.140 interface= RTZSd0 Where would all those numbers go Now that would realy be helpful if you can get me going with that becasue none of that works at all when i do the traditional sys-unconfig The only time i get a conection is when i touch two files /etc/hostname.RTZSd0 /etc/dhcp.RTZd0 Thanks again Remember all those are not my actual names and numbers but you can guide me in the right direction with that information This message posted from opensolaris.org
