Hi, could you provide dladm show-dev -s or netstat -i Why are you so sure that it's data-link level problem and not DNS for example?
2010/3/9 Lee <allisevil at gmail.com> > Hi All, > > Really hoping someone out there can help. > > I am new to Solaris/OpenSolaris but have a reasonable amount of experience > with Linux. I have recently installed OpenSolaris 2009.06 snv_111b X86 on a > HP Visualize P750 workstation. The system is booting and running fine with > the majority of hardware and services operating correctly. > > However I am having problems with the network adaptor that I cannot find a > solution to. The ethernet adaptor is an AMD PCnet32 LANCE and is using the > pcn driver. The adaptor is able to obtain an IP address and other network > configuration details via DHCP, however network performance is very slow and > unreliable. Web pages do not load, and establishing an SSH connection to the > linux box next to it takes around 5 minutes. > > The same network card has been tested on the same physical network using a > Ubuntu live cd. Additionally I have tried another network cable and switch > port. > > dladm show-ether yields the following: > Link: pcn0 ptype: current state:unknown auto:no speed-duplex: 0M > pause:none > > MTU is set to 1500 (shown by dladm show-linkprop pcn0) > > Not really sure where to go from here, but without a network connection the > box isn't very much fun! Any advice or guidance would be appreciated. > > Thanks, > Lee > -- > This message posted from opensolaris.org > _______________________________________________ > opensolaris-help mailing list > opensolaris-help at opensolaris.org > -- --------------------------------------------- http://unixinmind.blogspot.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://mail.opensolaris.org/pipermail/opensolaris-help/attachments/20100309/5e416e75/attachment.html>
