On Tue, Jan 16, 2007 at 06:27:58AM -0800, Matthew Jordan wrote: > So in order to get around the previous problem: > chmod +x /gp1/dev/mj_dsup/usr/usr/lib/libglib-2.0.so.0.1200.8 > chmod: WARNING: can't access > /gp1/dev/mj_dsup/usr/usr/lib/libglib-2.0.so.0.1200.8 > > I copied the file from the directory make puts it in: > cp /gp1/dev/mj_dsup/usr/usr/.libs/libglib-2.0.so.0.1200.8 > /gp1/dev/mj_dsup/usr/usr/src/lib/ > > Then reran "make install". (Note: I've tried starting again and copying it > before running make install but it hasnt helped.) > > Now the make install process loops loads, asking "Where should the software > be installed" lots and lots. To which I respond "/gp1/dev/mj_dsup/usr", as i > specified in the configure --prefix. (This prompting doesnt show in the > output file I link later but it asks after saying "*** INSTALLATION HAD > FAILURES ***"). > > Scolling through the output it seems to be running the same things over and > over! > > Please help!
Welcome to libtool, the 4294967295th circle of hell. The easiest way out of this problem is to use Solaris 10 or Nevada, which include glib already and, as an added bonus, would make the question on topic for this and other opensolaris.org mailing lists. -- Keith M Wesolowski "Sir, we're surrounded!" FishWorks "Excellent; we can attack in any direction!" _______________________________________________ opensolaris-help mailing list [email protected]
