> On Tue, Jan 16, 2007 at 06:27:58AM -0800, Matthew > Jordan wrote: > > > So in order to get around the previous problem: > > chmod +x > /gp1/dev/mj_dsup/usr/usr/lib/libglib-2.0.so.0.1200.8 > > chmod: WARNING: can't access > /gp1/dev/mj_dsup/usr/usr/lib/libglib-2.0.so.0.1200.8 > > > > I copied the file from the directory make puts it > in: > > cp > /gp1/dev/mj_dsup/usr/usr/.libs/libglib-2.0.so.0.1200.8 > /gp1/dev/mj_dsup/usr/usr/src/lib/ > > > > Then reran "make install". (Note: I've tried > starting again and copying it before running make > install but it hasnt helped.) > > > > Now the make install process loops loads, asking > "Where should the software be installed" lots and > lots. To which I respond "/gp1/dev/mj_dsup/usr", as > i specified in the configure --prefix. (This > prompting doesnt show in the output file I link later > but it asks after saying "*** INSTALLATION HAD > FAILURES ***"). > > > > Scolling through the output it seems to be running > the same things over and over! > > > > Please help! > > Welcome to libtool, the 4294967295th circle of hell. > The easiest way > ut of this problem is to use Solaris 10 or Nevada, > which include glib > already and, as an added bonus, would make the > question on topic for > this and other opensolaris.org mailing lists. >
Hmm, I'd must agree before an overflow but is it /usr/lib or /usr/sfw/lib for glib? ---Bob This message posted from opensolaris.org _______________________________________________ opensolaris-help mailing list [email protected]
