Hi all,
I know the question may sound silly but...
I have bought a used Ultra 60 with a SunPCi card already installed.
Being quite happy about the SPARC part of the system I decided to
experiment a bit with the PC card.
I have no details from the seller. Nevertheless, before following the
installation steps (which I've found here and there on the 'net) I'd
like to get a few info about my hardware.
The (supposedly) relevant part of "prtconf -v" is (I can attach the
whole log if needed):
...
pci108e,5043 (driver not attached)
pci, instance #1
Driver properties:
name='interrupt-priorities' type=int items=6 dev=none
value=0000000e.0000000e.0000000e.0000000e.0000000e.0000000e
Register Specifications:
Bus Type=0x1fe, Address=0x2000, Size=0x2000
Bus Type=0x1fe, Address=0x1800000, Size=0x100
Bus Type=0x1fe, Address=0x0, Size=0xd000
Device Minor Nodes:
dev=(111,511)
dev_path=/[EMAIL PROTECTED],2000:devctl
spectype=chr type=minor
dev=(111,509)
dev_path=/[EMAIL PROTECTED],2000:reg
spectype=chr type=minor
dev=(111,508)
dev_path=/[EMAIL PROTECTED],2000:intr
spectype=chr type=minor
...
Are there any other better commands to type?
Anybody can shed any light please?
Thanks,
-mw
_______________________________________________
opensolaris-help mailing list
[email protected]
