Hi,
I am trying to mount a HP SAN from my sun x4100 machine`s that are
interconnected with 4GB Fabric HBA cards from emulex.
The problem is I don`t see the LUN id`s and it doesn`t want to configure but
it the state is connected and unconfigured.
Solaris 10 11/06 s10x_u3wos_10 X86
Copyright 2006 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 14 November 2006
modprobe output for emlxs:
91 fffffffff02fe000 248e30 108 1 emlxs (SunFC emlxs FCA v20060920-2.11l)
svcs output:
svcs |grep fc-fabric
online 14:10:56 svc:/system/device/fc-fabric:default
dmesg output:
emlxs: [ID 349649 kern.info] [5.04C5]emlxs0: NOTICE: 720: Link up. (4Gb,
fabric)
emlxs: [ID 349649 kern.info] [5.0456]emlxs0: NOTICE: 710: Link down.
pcplusmp: [ID 398438 kern.info] pcplusmp: pci10df,fc10 (emlxs) instance #1
vector 0x26 ioapic 0x6 intin 0x2 is bound to cpu 1
emlxs: [ID 349649 kern.info] [B.1237]emlxs1: NOTICE: 100: Driver attach.
(Emulex-S s10-64 i386 v2.11l (2006.09.20.10.57))
emlxs: [ID 349649 kern.info] [B.1238]emlxs1: NOTICE: 100: Driver attach.
(LP11002-S Dev_id:fc10 Sub_id:fc12 Id:28)
emlxs: [ID 349649 kern.info] [B.123C]emlxs1: NOTICE: 100: Driver attach.
(Firmware:2.10a10 Boot:5.01a9)
emlxs: [ID 349649 kern.info] [B.1245]emlxs1: NOTICE: 100: Driver attach.
(WWPN:10000000C957E8B9 WWNN:20000000C957E8B9)
pci_pci: [ID 370704 kern.info] PCI-device: pci10df,[EMAIL PROTECTED],1, emlxs1
genunix: [ID 936769 kern.info] emlxs1
is /[EMAIL PROTECTED],0/pci1022,[EMAIL PROTECTED]/pci10df,[EMAIL PROTECTED],1
emlxs: [ID 349649 kern.info] [B.03FD]emlxs0: NOTICE: 720: Link up. (4Gb,
fabric *)
emlxs: [ID 349649 kern.info] [B.03FD]emlxs1: NOTICE: 720: Link up. (4Gb,
fabric *)
cfgadm output:
Ap_Id Type Receptacle Occupant
Condition
c0 scsi-bus connected configured unknown
c4 fc-fabric connected unconfigured unknown
c5 fc-fabric connected unconfigured unknown
usb0/1 unknown empty unconfigured ok
usb0/2 unknown empty unconfigured ok
usb0/3 usb-device connected configured ok
usb1/1 usb-storage connected configured ok
usb1/2 usb-storage connected configured ok
usb1/3 unknown empty unconfigured ok
cfgadm -al -o show_FCP_dev
Ap_Id Type Receptacle Occupant
Condition
c4 fc-fabric connected unconfigured unknown
c5 fc-fabric connected unconfigured unknown
Ap_Id Type Receptacle Occupant
Condition
c4 fc-fabric connected unconfigured unknown
c5 fc-fabric connected unconfigured unknown
I tried to put the Occupant to configured with the following command:
cfgadm -fvc configure c4 c5
But nothing happens, the state is still unconfigured.
If I reboot the machine the state is still the same ( unconfigured ).
Also tried with the following settings in the /kernell/drv/scsi_vhci.conf as
explained by the documentation from HP.
mpxio-disable="no"
device-type-scsi-options-list=
"HP OPEN", "symmetric-option";
symmetric-option = 0x1000000;
After a reboot it still doesn`t come up as a mountable device.
When running format it only sees c0 ( raid disk in system itself ).
With luxadm there is nothing to be found either:
luxadm probe
Although the device files are created:
luxadm -ev port
[127]
/devices/[EMAIL PROTECTED],0/pci1022,[EMAIL PROTECTED]/pci10df,[EMAIL
PROTECTED]/[EMAIL PROTECTED],0:devctl NOT
CONNECTED
/devices/[EMAIL PROTECTED],0/pci1022,[EMAIL PROTECTED]/pci10df,[EMAIL
PROTECTED],1/[EMAIL PROTECTED],0:devctl NOT
CONNECTED
ls -l /devices/pci@@1,0
total 4
drwxr-xr-x 2 root sys 512 Jun 7 14:29 pci1022,[EMAIL PROTECTED]
crw------- 1 root sys 84, 1023 Jun 7 14:29 pci1022,[EMAIL
PROTECTED]:devctl
drwxr-xr-x 2 root sys 512 Jun 7 14:29 pci1022,[EMAIL PROTECTED]
crw------- 1 root sys 84, 1279 Jun 7 14:29 pci1022,[EMAIL
PROTECTED]:devctl
Any of you experienced this behaviour before and know a solution to this
problem?
Thanks in advance
Matthew
_______________________________________________
opensolaris-help mailing list
[email protected]
