I need some assistance in order to get my new archive storage up and running.
I have a Sunfire v20z that I installed a Sil 3124 PCI-X controller on (SXCE
b64). The installation went fine, and the OS sees the controller.
[EMAIL PROTECTED]|grep 3124
167 fffffffff7d80000 6988 195 1 si3124 (si3124 driver v1.4)
I have a 5-500Gb stat disk stack connected via a 5->1 Sata (SiI 3726)
multiplexer. The disks don't show up on the scans. Well, that's not exactly
true... I do see one disk in the prtconf list. The stack is connected via port
0 of the controller
[EMAIL PROTECTED] -l
SATA_CFGA_GET_MODULE_INFO ioctl failed
SATA_CFGA_GET_MODULE_INFO ioctl failed
Ap_Id Type Receptacle Occupant Condition
sata0/0.1 sata-port empty unconfigured ok
sata0/0.2 sata-port empty unconfigured ok
sata0/0.3 sata-port empty unconfigured ok
sata0/1 sata-port empty unconfigured ok
sata0/2 sata-port empty unconfigured ok
sata0/3 sata-port empty unconfigured ok
Finally, the relevant portion of prtconf -v:
Device Minor Nodes:
dev=(84,767)
dev_path=/[EMAIL PROTECTED],0/pci1022,[EMAIL
PROTECTED]:devctl
spectype=chr type=minor
pci1095,3124, instance #0
Driver properties:
name='sata' type=int items=1 dev=none
value=00000001
name='initiator-interconnect-type' type=string items=1
dev=(195,0)
value='SPI'
name='scsi-selection-timeout' type=int items=1 dev=(195,0)
value=000000fa
name='scsi-options' type=int items=1 dev=(195,0)
value=00107ff8
name='scsi-watchdog-tick' type=int items=1 dev=(195,0)
value=0000000a
name='scsi-tag-age-limit' type=int items=1 dev=(195,0)
value=00000002
name='scsi-reset-delay' type=int items=1 dev=(195,0)
value=00000bb8
Hardware properties:
name='assigned-addresses' type=int items=15
value=83030810.00000000.fe108000.00000000.00000080.83030818.00000000.fe100000.00000000.00008000.81030820.00000000.00003000.00000000.00000010
name='reg' type=int items=20
value=00030800.00000000.00000000.00000000.00000000.03030810.00000000.00000000.00000000.00000080.03030818.00000000.00000000.00000000.00008000.01030820.00000000.00000000.00000000.00000010
name='compatible' type=string items=7
value='pci1095,3124.1095.3124.2' +
'pci1095,3124.1095.3124' + 'pci1095,3124' + 'pci1095,3124.2' + 'pci1095,3124' +
'pciclass,018000' + 'pciclass,0180'
name='model' type=string items=1
value='Mass storage controller'
name='power-consumption' type=int items=2
value=00000001.00000001
name='66mhz-capable' type=boolean
name='devsel-speed' type=int items=1
value=00000001
name='interrupts' type=int items=1
value=00000001
name='max-latency' type=int items=1
value=00000000
name='min-grant' type=int items=1
value=00000000
name='subsystem-vendor-id' type=int items=1
value=00001095
name='subsystem-id' type=int items=1
value=00003124
name='unit-address' type=string items=1
value='1'
name='class-code' type=int items=1
value=00018000
name='revision-id' type=int items=1
value=00000002
name='vendor-id' type=int items=1
value=00001095
name='device-id' type=int items=1
value=00003124
name='pci-msi-capid-pointer' type=int items=1
value=00000054
name='pcix-capid-pointer' type=int items=1
value=00000040
Interrupt Specifications:
Interrupt Priority=0x5 (ipl 5), vector=0xa (10)
Device Minor Nodes:
dev=(195,0)
dev_path=/[EMAIL PROTECTED],0/pci1022,[EMAIL
PROTECTED]/pci1095,[EMAIL PROTECTED]:devctl
spectype=chr type=minor
dev=(195,1024)
dev_path=/[EMAIL PROTECTED],0/pci1022,[EMAIL
PROTECTED]/pci1095,[EMAIL PROTECTED]:0
spectype=chr type=minor
dev_link=/dev/cfg/sata0/0
dev_path=/[EMAIL PROTECTED],0/pci1022,[EMAIL
PROTECTED]/pci1095,[EMAIL PROTECTED]:0.5
spectype=chr type=minor
dev_link=/dev/cfg/sata0/0.5
dev_path=/[EMAIL PROTECTED],0/pci1022,[EMAIL
PROTECTED]/pci1095,[EMAIL PROTECTED]:0.4
spectype=chr type=minor
dev_link=/dev/cfg/sata0/0.4
dev_path=/[EMAIL PROTECTED],0/pci1022,[EMAIL
PROTECTED]/pci1095,[EMAIL PROTECTED]:0.3
spectype=chr type=minor
dev_link=/dev/cfg/sata0/0.3
dev_path=/[EMAIL PROTECTED],0/pci1022,[EMAIL
PROTECTED]/pci1095,[EMAIL PROTECTED]:0.2
spectype=chr type=minor
dev_link=/dev/cfg/sata0/0.2
dev_path=/[EMAIL PROTECTED],0/pci1022,[EMAIL
PROTECTED]/pci1095,[EMAIL PROTECTED]:0.1
spectype=chr type=minor
dev_link=/dev/cfg/sata0/0.1
dev_path=/[EMAIL PROTECTED],0/pci1022,[EMAIL
PROTECTED]/pci1095,[EMAIL PROTECTED]:0.0
spectype=chr type=minor
dev_link=/dev/cfg/sata0/0.0
dev=(195,1025)
dev_path=/[EMAIL PROTECTED],0/pci1022,[EMAIL
PROTECTED]/pci1095,[EMAIL PROTECTED]:1
spectype=chr type=minor
dev_link=/dev/cfg/sata0/1
dev=(195,1026)
dev_path=/[EMAIL PROTECTED],0/pci1022,[EMAIL
PROTECTED]/pci1095,[EMAIL PROTECTED]:2
spectype=chr type=minor
dev_link=/dev/cfg/sata0/2
dev=(195,1027)
dev_path=/[EMAIL PROTECTED],0/pci1022,[EMAIL
PROTECTED]/pci1095,[EMAIL PROTECTED]:3
spectype=chr type=minor
dev_link=/dev/cfg/sata0/3
disk (driver not attached)
Hardware properties:
name='compatible' type=string items=4
value='scsiclass,00.vATA.pMaxtor_7H500F0.r1DD0' +
'scsiclass,00.vATA.pMaxtor_7H500F0' + 'scsiclass,00' + 'scsiclass'
name='lun' type=int items=1
value=00000000
name='target' type=int items=1
value=00000200
name='device-type' type=string items=1
value='scsi'
Does this mean that the Solaris driver can't deal with the Sata multiplexer? I
thought that this was a transparent property of the 3124 controller chip.
This message posted from opensolaris.org
_______________________________________________
opensolaris-help mailing list
[email protected]
