Take a look at man page of lucreate and luupgrade, here are some tips: 1. set up the s3 partition in format command to be the same size as s0 or bigger I use 8g , the snv and 10ux has been getting bigger over time, just like all OS;s has. Part Tag Flag Cylinders Size Blocks 0 unassigned wm 3074 - 4093 7.81GB (1020/0/0) 16386300 1 swap wu 3 - 1022 7.81GB (1020/0/0) 16386300 2 backup wm 0 - 11118 85.18GB (11119/0/0) 178626735 3 root wm 2054 - 3073 7.81GB (1020/0/0) 16386300
2. you can mount the iso or mount the dvd in the dvdrom + ./mountdvd.sh sol-nv-b77-x86-dvd.iso + lofiadm -a /zones/sol-nv-b77-x86-dvd.iso + mount -F hsfs -o ro /dev/lofi/1 /export/install/dvd + + echo ./lucreate.sh 10-u4-ga c0d0s0 nv-b77 c0d0s3 2. run the lucreate: + lucreate -C /dev/dsk/c0d0s0 -m /:/dev/dsk/c0d0s3:ufs -n altroot_nv-b77_c0d0s3 3. the the luupgrade command + luupgrade -u -n altroot_nv-b77_c0d0s3 -s /export/install/dvd 4. then the luactivate + luactivate altroot_nv-b77_c0d0s3 5. check lustatus command # lustatus Boot Environment Is Active Active Can Copy Name Complete Now On Reboot Delete Status -------------------------- -------- ------ --------- ------ ---------- c0d0s0 yes no no yes - altroot_nv-b77_c0d0s3 yes yes yes no - This message posted from opensolaris.org _______________________________________________ opensolaris-help mailing list [email protected]
