Tek Bahadur Limbu wrote:
> Hi All,
>
> Sorry for the oblivious question but I recently added a secondary hard
> drive in Solaris 10.
>
>
> Which tool do I need to display this new secondary hard drive
> information in addition to my current primary hard drive?
>
> Thanking you...
>
I ran the command "format":
13:41:46 [EMAIL PROTECTED]:~$ format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1d0 <DEFAULT cyl 4859 alt 2 hd 255 sec 63>
/[EMAIL PROTECTED],0/[EMAIL PROTECTED],1/[EMAIL PROTECTED]/[EMAIL
PROTECTED],0
First, it showed only 1 hard drive.
As I googled, I ran the following commands:
drvconfig, devlinks, disks
I am not sure but one of those commands worked and now I get the
following information with "format":
13:41:55 [EMAIL PROTECTED]:~$ format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1d0 <DEFAULT cyl 4859 alt 2 hd 255 sec 63>
/[EMAIL PROTECTED],0/[EMAIL PROTECTED],1/[EMAIL PROTECTED]/[EMAIL
PROTECTED],0
1. c2d0 <drive type unknown>
/[EMAIL PROTECTED],0/[EMAIL PROTECTED],1/[EMAIL PROTECTED]/[EMAIL
PROTECTED],0
Specify disk (enter its number):
I assume that "c2d0" is my secondary hard drive. This is a disk which
had a working FreeBSD-6.2 OS in it before I attached it to my Solaris 10
machine.
What I want to know is that before formatting this drive, can I use some
kind of tool to retrieve some of my data on this FreeBSD drive?
Yes I should have back up the FreeBSD drive before removing it but I did
not!!
Is there a way out of this?
Thanking you...
--
With best regards and good wishes,
Yours sincerely,
Tek Bahadur Limbu
System Administrator
(TAG/TDG Group)
Jwl Systems Department
Worldlink Communications Pvt. Ltd.
Jawalakhel, Nepal
http://www.wlink.com.np
http://teklimbu.wordpress.com
_______________________________________________
opensolaris-help mailing list
[email protected]
