Hello everyone,
I've just installed SXDE 1/08 as my domU. When I boot into the xVM option, my
dom0 has network connectivity and is able to connect to the outside world.
However, the domUs (also Solaris, 79a or 89b) I create are unable to do so.
After searching around, it seems the problem is that dom0 doesn't create a
bridge, xbr0. After reading several posts/threads on this topic, I'm under the
impression that it needs to create a bridged network to enable domUs to be able
to communicate on the network.
Here's the output of 'ifconfig -a' on my dom0.
ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
inet 127.0.0.1 netmask ff000000
bnx0: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 4
inet 1xx.xx.207.212 netmask ffffff00 broadcast 142.58.207.255
bnx1: flags=201000802<BROADCAST,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 0.0.0.0 netmask 0
bnx2: flags=201000802<BROADCAST,MULTICAST,IPv4,CoS> mtu 1500 index 3
inet 0.0.0.0 netmask 0
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252
index 1
inet6 ::1/128
How do I enable bridging in dom0 and/or get networking connectivity in my
domUs? I'm wondering if anyone can tell me what I'm doing wrong and guide me in
the right direction.
Thanks for reading this,
Viren
This message posted from opensolaris.org
_______________________________________________
opensolaris-help mailing list
[email protected]
