> Hello.
>
> I am having the same problem while connecting to
> internet. I use lan wire and a modem to connect to
> internet.
>
> Here is the information when I did ifconfig -a and
> netstat -rn. (from the terminal script file I saved)
>
>
> [EMAIL PROTECTED]:/media/JAY# ifconfig -a
> lo0:
> flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VI
> RTUAL> mtu 8232 index 1
> inet 127.0.0.1 netmask ff000000
> e1000g0:
> flags=201004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IP
> v4,CoS> mtu 1500 index 3
> inet 0.0.0.0 netmask ff000000
> ether 0:1a:4b:89:39:25
You have not received a DHCP address . check your DHCP server
or Configure The Address Manually.
> I also used the device driver utility and found that
> Broadcom Corporation BCM94311MCG wlan mini-PCI driver
> was mising.
Broadcom Only provides Drivers for windows .
Broadcom also refuse to share the specs of their hardware .
There will never be open Source drivers for Broadcoms WLAN unless
Broadcom changes its policy.
I recommend that you replace the Broadcom mini-PCI WLAN card with
an Intel card. 2200BG or 4956BGN works well.
This message posted from opensolaris.org
_______________________________________________
opensolaris-help mailing list
[email protected]
