Hi thanks for the help already well this is my hw setup
Asus motherboard m2NVP 2gig kingston ram 2xsata WD 500 gig (this is the datatank zpool) 1xmaxtor ata 20gig (this is the opensolaris boot disk) cable length is ok and the installation went fine expect that i got that iscsi error when i poweroff. in the mean time : i removed the files that were corrupted,scrubbed the datatank mirror and the did status -v datatank and i got this : pool: datatank state: DEGRADED status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine if the device needs to be replaced, and clear the errors using 'zpool clear' or replace the device with 'zpool replace'. see: http://www.sun.com/msg/ZFS-8000-9P scrub: scrub completed after 0h4m with 0 errors on Tue Jul 8 22:17:26 2008 config: NAME STATE READ WRITE CKSUM datatank DEGRADED 0 0 4 mirror DEGRADED 0 0 4 c5d0 DEGRADED 0 0 8 too many errors c7d0 DEGRADED 0 0 8 too many errors errors: No known data errors then i used the zpool clear command zpool clear datatank : and this it the output : pool: datatank state: ONLINE scrub: scrub completed after 0h4m with 0 errors on Tue Jul 8 22:17:26 2008 config: NAME STATE READ WRITE CKSUM datatank ONLINE 0 0 0 mirror ONLINE 0 0 0 c5d0 ONLINE 0 0 0 c7d0 ONLINE 0 0 0 errors: No known data errors But is this really ok ? because everytime i got a file corruption i can't do these steps. Btw the files aren't corrupt on my macbook so how come they get corrupted during the transport or on the mirror ? and the error i mentioned on my boot disk is that of some vallue, i searched on the net and found the the package is related with iscsi but i have only sata and ata so. This message posted from opensolaris.org _______________________________________________ opensolaris-help mailing list [email protected]
