Jürgen Keil wrote:
What is the pci vendor and device id for your adaptec 2940 card?
(check scanpci -v output)
pci bus 0x0003 cardnum 0x06 function 0x00: vendor 0x9004 device 0x8178
SX:CE supports these devices with the cadp driver:
# grep "^cadp " /etc/driver_aliases
Looks like a vendor/device mismatch.
Yep, "cadp" is the wrong driver; we need "adp".
Again, this driver is not available as 64-bit driver.
And it's probably missing in OpenSolaris.
In SX:CE it's part of the SUNWadp package.
% grep "^adp " /etc/driver_aliases
adp "pci9004,7078"
adp "pci9004,7178"
adp "pci9004,7278"
adp "pci9004,7478"
adp "pci9004,7578"
adp "pci9004,8078"
adp "pci9004,8178" <<<<<<
adp "pci9004,8278"
adp "pci9004,8478"
adp "pci9004,8578"
adp "pci9004,5078"
adp "pci9004,5578"
adp "pci9004,6078"
adp "pci9004,6075"
adp "pci9004,6178"
adp "pci9004,6278"
adp "pci9004,7860"
adp "pci9004,7880"
adp "pci9004,7881"
adp "pci9004,7884"
adp "pci9004,7891"
adp "pci9004,7892"
adp "pci9004,7895"
Success!!! I installed the adp driver and it works in
32-bit mode. The controller and the tape drive attached
to it is recognized.
--
Michael Eager [email protected]
1960 Park Blvd., Palo Alto, CA 94306 650-325-8077
_______________________________________________
opensolaris-help mailing list
[email protected]
