Hi:
I have a zfs pool called usbstorage which consists of one single external usb
disk as shown below:
# zpool status usbstorage
pool: usbstorage
state: UNAVAIL
status: One or more devices could not be opened. There are insufficient
replicas for the pool to continue functioning.
action: Attach the missing device and online it using 'zpool online'.
see: http://www.sun.com/msg/ZFS-8000-3C
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
usbstorage UNAVAIL 0 0 0 insufficient replicas
c8t0d0 UNAVAIL 0 0 0 cannot open
I took the disk from the external usb enclosure and put it inside my computer
as an internal disk. Opensolaris recognizes the disk as c9d1 now. Since the
data is intact, is there anyway I can replace c8t0d0 with c9d1s0? I tried using
the command:
zpool replace usbstorage c8t0d0 c9d1s0, but gotten this error back:
cannot open 'usbstorage': pool is unavailable
I'll appreciate any zfs guru can assist in this matter.
Thanks,
Keith
--
This message posted from opensolaris.org
_______________________________________________
opensolaris-help mailing list
[email protected]
