Hi, I am trying to setup OpenSolaris snv134 and I am facing problems with the QLogic QLE2360, that I inserted into the system.
When I run the device driver utility, it doesn't identify the card as a QLE2360 but as a "QLogic device based on ISP2322" that is unconfigured. I also tried to install the QLA2300 driver and modified /etc/driver_aliases. Upon reboot the HBA gets recognized as hba0 and the firmware revision is printed to the console, but right afterwards, the OS seems to have issues with the HAL daemon. Now, the system does detect the attached storage, a NetApp Diskshelf DS14MK2, but it seems to take forever for it to scan through the devices, taking approx. 10 minutes for each device. Also the qlreconfig utility does seem to have issues when running devsadm, which is stalling now for about 10 mins. Are there any special settings that I need to pass to the driver to get this resolved? Thanks, budy -- This message posted from opensolaris.org _______________________________________________ opensolaris-help mailing list opensolaris-help@opensolaris.org
