On Thu, Jan 16, 2014 at 10:53:11PM +1300, Robert Collins <[email protected]> wrote:
> On 16 January 2014 22:51, Robert Collins <[email protected]> wrote: > > > I don't think 1 is a special case of 3 - interface based connections > > are dependent on physical wiring, > > > > How about 4. Send a few packets with a nonce in them to any of the > > already meshed nodes, and those nodes can report what ip they > > originated from. > > Oh, and 5: do an 'ip route get <ip of existing mesh node>' which will > give you output like: > Press ENTER or type command to continue > 192.168.3.1 via 192.168.1.1 dev wlan0 src 192.168.1.17 > cache 6: run a command which is specified in the config file. use its output. Then arbitrary logic can be used by writing shell script or whatever without modifying neutron. Some samples which implement option 1-5 can be put in the repo. thanks, Isaku Yamahata > > The src is the src address the local machine would be outputting from. > > -Rob > > -- > Robert Collins <[email protected]> > Distinguished Technologist > HP Converged Cloud > > _______________________________________________ > OpenStack-dev mailing list > [email protected] > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev -- Isaku Yamahata <[email protected]> _______________________________________________ OpenStack-dev mailing list [email protected] http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
