Ok. So the actual error message is "Invalid input for operation: physical_network 'provider1' unknown for VLAN provider network.".
That means that in your Neutron server configuration file under the [ml2_type_vlan] section you need to add 'provider1' to the 'network_vlan_ranges' option. On Sun, Jun 18, 2017 at 9:04 AM, Alex Evonosky <alex.evono...@gmail.com> wrote: > Kevin- > > Thank you for the tip. The Debug is attached as well. > > Thank you. > > On Sun, Jun 18, 2017 at 11:54 AM, Kevin Benton <ke...@benton.pub> wrote: > >> The openstack command should have an option to enable debugging so you >> can get the error message. Try openstack --debug >> >> >> >> On Sun, Jun 18, 2017 at 7:27 AM, Alex Evonosky <alex.evono...@gmail.com> >> wrote: >> >>> Gary- >>> >>> Thank you for the feedback. I issued the command while tailing the log: >>> >>> *2017-06-18 10:24:51.841 12018 INFO neutron.api.v2.resource >>> [req-da8fa8be-1cae-4b5e-a1cf-2206a284476a 7e7176b79f94483c8b802a7004466e66 >>> 664dc5e6023140eca0faeb2d0ecc31c2 - - -] create failed (client error): The >>> server could not comply with the request since it is either malformed or >>> otherwise incorrect.* >>> *2017-06-18 10:24:51.843 12018 INFO neutron.wsgi >>> [req-da8fa8be-1cae-4b5e-a1cf-2206a284476a 7e7176b79f94483c8b802a7004466e66 >>> 664dc5e6023140eca0faeb2d0ecc31c2 - * >>> >>> >>> As for the ocata config, this was built by using the ocata: >>> >>> https://docs.openstack.org/ocata/install-guide-ubuntu/ >>> >>> >>> Thank you. >>> >>> >>> >>> >>> On Sun, Jun 18, 2017 at 10:17 AM, Gary Kotton <gkot...@vmware.com> >>> wrote: >>> >>>> Hi, >>>> >>>> Please look in /var/log/neutron/neutron-server.log >>>> >>>> That should provide and exception trace >>>> >>>> Thanks >>>> >>>> Gary >>>> >>>> >>>> >>>> *From: *Alex Evonosky <alex.evono...@gmail.com> >>>> *Date: *Sunday, June 18, 2017 at 5:04 PM >>>> *To: *"openstack@lists.openstack.org" <openstack@lists.openstack.org> >>>> *Subject: *[Openstack] Routed provider networks >>>> >>>> >>>> >>>> Hello- >>>> >>>> >>>> >>>> I wanted to test the routed provider networks of Ocata, and following >>>> the example config: >>>> >>>> >>>> >>>> https://docs.openstack.org/ocata/networking-guide/config-rou >>>> ted-networks.html >>>> >>>> >>>> >>>> I typed in the following on my controller node: >>>> >>>> >>>> >>>> >>>> >>>> @openstack-controller1:~# openstack network create --share >>>> --provider-physical-network provider1 --provider-network-type vlan >>>> --provider-segment 2016 multisegment1 >>>> >>>> >>>> >>>> and I receive this: >>>> >>>> >>>> >>>> *Error while executing command: Bad Request* >>>> >>>> >>>> >>>> >>>> >>>> Is there a log that may show what this error is referring to? >>>> >>>> >>>> >>>> >>>> >>>> Thank you. >>>> >>>> >>>> >>> >>> >>> _______________________________________________ >>> Mailing list: http://lists.openstack.org/cgi >>> -bin/mailman/listinfo/openstack >>> Post to : openstack@lists.openstack.org >>> Unsubscribe : http://lists.openstack.org/cgi >>> -bin/mailman/listinfo/openstack >>> >>> >> >
_______________________________________________ Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Post to : openstack@lists.openstack.org Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack