It may be in /etc/neutron/plugins/ml2_conf.ini or somewhere in there. Run 'ps -ef | grep neutron-server' to see which config files are being referenced in your deployment.
On Sun, Jun 18, 2017 at 9:13 AM, Alex Evonosky <alex.evono...@gmail.com> wrote: > Thank you Kevin, > > In the /etc/neutron/neutron.conf file, there is no [ml2_type_vlan] > section under ocata. Do I need to add this section in? > > Thank you. > > On Sun, Jun 18, 2017 at 12:08 PM, Kevin Benton <ke...@benton.pub> wrote: > >> Ok. So the actual error message is "Invalid input for operation: >> physical_network 'provider1' unknown for VLAN provider network.". >> >> That means that in your Neutron server configuration file under the >> [ml2_type_vlan] section you need to add 'provider1' to the >> 'network_vlan_ranges' option. >> >> >> >> On Sun, Jun 18, 2017 at 9:04 AM, Alex Evonosky <alex.evono...@gmail.com> >> wrote: >> >>> Kevin- >>> >>> Thank you for the tip. The Debug is attached as well. >>> >>> Thank you. >>> >>> On Sun, Jun 18, 2017 at 11:54 AM, Kevin Benton <ke...@benton.pub> wrote: >>> >>>> The openstack command should have an option to enable debugging so you >>>> can get the error message. Try openstack --debug >>>> >>>> >>>> >>>> On Sun, Jun 18, 2017 at 7:27 AM, Alex Evonosky <alex.evono...@gmail.com >>>> > wrote: >>>> >>>>> Gary- >>>>> >>>>> Thank you for the feedback. I issued the command while tailing the >>>>> log: >>>>> >>>>> *2017-06-18 10:24:51.841 12018 INFO neutron.api.v2.resource >>>>> [req-da8fa8be-1cae-4b5e-a1cf-2206a284476a 7e7176b79f94483c8b802a7004466e66 >>>>> 664dc5e6023140eca0faeb2d0ecc31c2 - - -] create failed (client error): The >>>>> server could not comply with the request since it is either malformed or >>>>> otherwise incorrect.* >>>>> *2017-06-18 10:24:51.843 12018 INFO neutron.wsgi >>>>> [req-da8fa8be-1cae-4b5e-a1cf-2206a284476a 7e7176b79f94483c8b802a7004466e66 >>>>> 664dc5e6023140eca0faeb2d0ecc31c2 - * >>>>> >>>>> >>>>> As for the ocata config, this was built by using the ocata: >>>>> >>>>> https://docs.openstack.org/ocata/install-guide-ubuntu/ >>>>> >>>>> >>>>> Thank you. >>>>> >>>>> >>>>> >>>>> >>>>> On Sun, Jun 18, 2017 at 10:17 AM, Gary Kotton <gkot...@vmware.com> >>>>> wrote: >>>>> >>>>>> Hi, >>>>>> >>>>>> Please look in /var/log/neutron/neutron-server.log >>>>>> >>>>>> That should provide and exception trace >>>>>> >>>>>> Thanks >>>>>> >>>>>> Gary >>>>>> >>>>>> >>>>>> >>>>>> *From: *Alex Evonosky <alex.evono...@gmail.com> >>>>>> *Date: *Sunday, June 18, 2017 at 5:04 PM >>>>>> *To: *"openstack@lists.openstack.org" <openstack@lists.openstack.org> >>>>>> *Subject: *[Openstack] Routed provider networks >>>>>> >>>>>> >>>>>> >>>>>> Hello- >>>>>> >>>>>> >>>>>> >>>>>> I wanted to test the routed provider networks of Ocata, and following >>>>>> the example config: >>>>>> >>>>>> >>>>>> >>>>>> https://docs.openstack.org/ocata/networking-guide/config-rou >>>>>> ted-networks.html >>>>>> >>>>>> >>>>>> >>>>>> I typed in the following on my controller node: >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> @openstack-controller1:~# openstack network create --share >>>>>> --provider-physical-network provider1 --provider-network-type vlan >>>>>> --provider-segment 2016 multisegment1 >>>>>> >>>>>> >>>>>> >>>>>> and I receive this: >>>>>> >>>>>> >>>>>> >>>>>> *Error while executing command: Bad Request* >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> Is there a log that may show what this error is referring to? >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> Thank you. >>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> Mailing list: http://lists.openstack.org/cgi >>>>> -bin/mailman/listinfo/openstack >>>>> Post to : openstack@lists.openstack.org >>>>> Unsubscribe : http://lists.openstack.org/cgi >>>>> -bin/mailman/listinfo/openstack >>>>> >>>>> >>>> >>> >> >
_______________________________________________ Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Post to : openstack@lists.openstack.org Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack