On vrijdag 13 september 2013 22:38:39 wrote [email protected]: > ----- Freek de Kruijf <[email protected]> a écrit : > You must copy the content of /boot in your FAT partition. > > You may need to update the Config.txt file (from FAT partition) to have > kernel=zImage instead of kernel=Image
This did the trick. Now I have a system with a working wlan0 interface. After setting the STARTMODE of the Ethernet interface to ifplugd, I can start the system without a connected Ethernet cable and connect via wifi. With the status onboot and a not connected Ethernet cable, I could not make a connection with the RPi system. The strange thing is that of the indicator leds only the red light is on; all others remain off and only when I have an Ethernet cable connected, the other lights are on or they blink. In order to have a working system for my purpose, I need a working bluetooth interface. However the package bluez and bluez-devel are missing in the repository. Another problem is probably with the ncurses interface to the firewall module in YaST. I can enable the firewall in that module and "custom setting" works, but all other, like interfaces, allowed services, etc. do not work. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
