----- Freek de Kruijf <[email protected]> a écrit : > On vrijdag 13 september 2013 22:38:39 wrote [email protected]: > > ----- Freek de Kruijf <[email protected]> a écrit : > > You must copy the content of /boot in your FAT partition. > > > > You may need to update the Config.txt file (from FAT partition) to have > > kernel=zImage instead of kernel=Image > > This did the trick. Now I have a system with a working wlan0 interface. After
Good news! > setting the STARTMODE of the Ethernet interface to ifplugd, I can start the > system without a connected Ethernet cable and connect via wifi. With the > status onboot and a not connected Ethernet cable, I could not make a > connection with the RPi system. The strange thing is that of the indicator > leds only the red light is on; all others remain off and only when I have an > Ethernet cable connected, the other lights are on or they blink. This is normal. Those LEDs are related to ethernet (connected, 10/100 and activity, or something like that). > > In order to have a working system for my purpose, I need a working bluetooth > interface. However the package bluez and bluez-devel are missing in the > repository. You can download it from OBS manually (via web interface, not repo) and install RPMs using zypper. > > Another problem is probably with the ncurses interface to the firewall module > in YaST. I can enable the firewall in that module and "custom setting" works, > but all other, like interfaces, allowed services, etc. do not work. Will test it later. But do you have any error log to report? Guillaume > > -- > fr.gr. > > member openSUSE > Freek de Kruijf > > -- > To unsubscribe, e-mail: [email protected] > To contact the owner, e-mail: [email protected] > -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
