Hi,
Le 20/08/2014 22:34, Andreas Färber a écrit :
Am 20.08.2014 19:04, schrieb Matwey V. Kornilov:
19.08.2014 19:56, Matwey V. Kornilov пишет:
01.08.2014 18:00, Andreas Färber пишет:
Handling a recent SR, I noticed that our Base:System u-boot is still at
v2014.04.
I think it is worth to start with v2014.10-rc1
I am trying to do it here:
https://build.opensuse.org/project/monitor/home:matwey:branches:Base:System
Stephan had started looking into v2014.07 but also ran into issues with
patches. Did you find out what to do about Cubox-i and sunxi?
Is it mainlined now or not? I think some times ago Dirk said to drop sunxi
patches from Base:System and handle them at a project level. Dirk, could you
confirm, please?
Now I need a hint what is to do with:
[ 309s] ld.bfd: address 0x2026c40 of u-boot-spl section
`.machine_param' is not within region `.sram'
[ 309s] ld.bfd: u-boot-spl section `.bss' will not fit in region `.sram'
[ 309s] ld.bfd: address 0x2026c40 of u-boot-spl section
`.machine_param' is not within region `.sram'
[ 309s] ld.bfd: address 0x2026c40 of u-boot-spl section
`.machine_param' is not within region `.sram'
[ 309s] ld.bfd: region `.sram' overflowed by 88 bytes
I think I reported something similar for an earlier version - most
likely the Beagle'ish MLO patch that adds ext4 support to the SPL needs
to be disabled until we have a better solution such as disabling FAT.
Disabled where not needed, otherwise boards won't boot anymore.
To be clear, I am suggesting to revert any weird hacks that break the
build until their authors care to properly submit upstream their
changes. (Guillaume luckily came up with some new hack to fix the old
hack last time, but apparently we still don't have a real solution.)
I started to make MLO-EXT2 patch better (upstreamable) some times ago but did
not have time to test it.
The only patches "really" needed are the config patches to allow for raw
initrd etc.; hardware-enabling patches (cubox, sunxi) could be limited
to individual boards where not done already.
I agree.
Guillaume
--
To unsubscribe, e-mail: [email protected]
To contact the owner, e-mail: [email protected]
